UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

Browse by UCL Departments and Centres

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Author | Type
Jump to: B | C | D | E | F | G | H | L | M | N | O | P | R | S | T | V | Y | Z
Number of items: 44.

B

Bailey, JJ; Bucknall, RWG; Haines, NA; (1994) Design and development of a single-phase six- pulse cycloconverter for induction motor control. In: Proc 30th Universities Power Engineering Conference. UPEC

Bucknall, RWG; Juby, L; Hains, NA; (1994) Cycloconverter Propulsion Systems: Modelling Performance in the Laboratory. Journal of Naval Ships (Special Edition - Russia) , 3 , Article Paper 18.

C

Chawla, A; Buckton, G; Taylor, KMG; Newton, JM; Johnson, MCR; (1994) Wilhelmy plate contact angle data on powder compacts: considerations of plate perimeter. European Journal of Pharmaceutical Sciences , 2 (3) 253 - 258. 10.1016/0928-0987(94)90030-2.

Chawla, A; Taylor, KMG; Newton, JM; Johnson, MCR; (1994) Production of spray dried salbutamol sulphate for use in dry powder aerosol formulation. International Journal of Pharmaceutics , 108 (3) 233 - 240.

Course, NC; Newton, JM; Short, MB; (1994) The influence of size and density on the gastro-intestinal transit of tablets. In: European Journal of Pharmaceutics and Biophamaceutics. (pp. 57S - ?). medpharm Sientific Publishesrs: Stuttgart, Germany.

D

DIAZ, P; EDIRISINGHE, MJ; RALPH, B; (1994) CHARACTERIZATION OF A ZIRCONIA-YTTRIA-TITANIA THERMAL BARRIER COATING. J MATER SCI LETT , 13 (22) 1595 - 1598.

E

EAMES, I; Belcher, SE; Hunt, JCR; (1994) Drift, partial drift and Darwin's proposition. Journal of Fluid Mechanics , 275 201 - 223. 10.1017/S0022112094002338. Green open access
file

F

Fu, H; Watkins, AP; Yianneskis, M; (1994) The effects of flow split ratio and flow rate in manifolds. International Journal for Numerical Methods in Fluids , 18 (9) 871 - 886. 10.1002/fld.1650180906.

G

Goto, A; Takemura, T; Zangeneh, M; (1994) Suppression of secondary flows in a mixed-flow pump impeller by application of 3D inverse design method: part 2 - experimental validation. American Society of Mechanical Engineers (Paper) 1 - 9.

Greig, A; (1994) Do not let fingers do the working. The Times (Part III) 10 - 10.

Greig, AR; Broome, DR; (1994) Development of a robotic underwater manipulator. Transactions of Insititue of Marine Engineers , 106 (5) 217 - 229.

H

Haines, NA; Bucknall, RWG; Evans, G; (1994) Full Electric Propulsion: A Cost Effective Low Noise Solution? Journal of Naval Ships (Special Edition - Russia) , 3 , Article Paper 7.

L

Ladommatos, N; Balian, RA; Horrocks, R; Cooper, L; (1994) Investigation of the benefits of controlling the start of combustion in a direct injection diesel engine using an optical sensor. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , 208 (2) 129 - 137.

Ladommatos, N; Zhao, H; (1994) A guide to measurement of flame temperature and soot concentration in diesel engines using the two-colour method part 2: Implementation. SAE Technical Papers

Ladommatos, N; Zhao, H; (1994) A guide to measurement of flame temperature and soot concentration in diesel engines using the two-colour method Part I: Principles. SAE Technical Papers

Luo, KH; Sandham, ND; (1994) On the formation of small scales in a compressible mixing layer. In: Voke, PR and Kleiser, L and Chollet, J-P, (eds.) Direct and Large-eddy Simulation I. (? - ?). Kluwer Academic Pub

M

Mackellar, AJ; Buckton, G; Newton, JM; Chowdhry, BZ; Orr, CA; (1994) The controlled crystallisation of a model powder: 1. The effects of altering the stirring rate and the supersaturation profile, and the incorporation of a surfactant (Poloxamer 188). International Journal of Pharmaceutics , 112 (1) 65 - 78. 10.1016/0378-5173(94)90262-3.

Mackellar, AJ; Buckton, G; Newton, JM; Orr, CA; (1994) The controlled crystallisation of a model powder: 2. Investigation into the mechanism of action of poloxamers in changing crystal properties. International Journal of Pharmaceutics , 112 (1) 79 - 85. 10.1016/0378-5173(94)90263-1.

MIODOWNIK, M; MARTIN, J; LITTLE, E; (1994) SECONDARY RECRYSTALLIZATION OF 2 OXIDE DISPERSION-STRENGTHENED FERRITIC SUPERALLOYS - MA-956 AND MA-957. MATERIALS SCIENCE AND TECHNOLOGY , 10 (2) 102 - 109.

N

Newton, JM; (1994) Extrusion/spheroisation. In: Chulia, D and Deleuil, M and Pourcelot, Y, (eds.) Powder Technology and Pharmaceutical processes. (391 - 401). Elsevier: Amsterdam, The Netherlands.

Newton, JM; Charlton, B; (1994) Fatcors affecting the density distribution within powder compacts. In: European Journal of Pharmaceutics and Biopharmaceutics. (pp. 19S - ?). medpharm Svientific Publishers: Stuttgart, Germany.

O

OLSZYNA, A; EDIRISINGHE, MJ; RALPH, B; DUTTA, KK; (1994) ON THE EFFECT OF LOCAL VARIATIONS IN DENSITY IN MONOLITHIC CERAMIC BODIES. CERAM INT , 20 (1) 1 - 8.

P

PODCZECK, F; NEWTON, JM; (1994) A SHAPE FACTOR TO CHARACTERIZE THE QUALITY OF SPHEROIDS. J PHARM PHARMACOL , 46 (2) 82 - 85.

PODCZECK, F; NEWTON, JM; JAMES, MB; (1994) ASSESSMENT OF ADHESION AND AUTOADHESION FORCES BETWEEN PARTICLES AND SURFACES .1. THE INVESTIGATION OF AUTOADHESION PHENOMENA OF SALMETEROL XINAFOATE AND LACTOSE MONOHYDRATE PARTICLES USING COMPACTED POWDER SURFACES. J ADHES SCI TECHNOL , 8 (12) 1459 - 1472.

Podczeck, F; Newton, JM; James, MB; (1994) The assessment of autoadhesion and particle friction of lactose on lactose tablet surfaces. In: European Journal of Pharmaceutics and Biopharmaceutics. (pp. 6S - ?). medpharm Scientific Publishers: Stuttgart, Germany.

Podczeck, F; Yuen, KH; Newton, JM; (1994) Calculations of the drug absorption rates of two sustained release theophylline formulations using maximum entropy. In: Gurney, R, (ed.) Europran Journal of Pharmaceutics and Biopharmaceutics. (pp. 60S - ?). medpharm, GmbH Scientific Publishers: Stutgart, Germany.

R

Roberts, TJ; Evans, GJ; Richardson, J; Bucknall, R; (1994) Active filtering of multiple non-integer harmonic currents. 477 - 480.

Rose, D; Ladommatos, N; Stone, R; (1994) In-cylinder mixture excursions in a port-injected engine during fast throttle opening. SAE Technical Papers

S

SHAW, HM; EDIRISINGHE, MJ; (1994) POROSITY DEVELOPMENT DURING REMOVAL OF ORGANIC VEHICLE FROM CERAMIC INJECTION MOLDINGS. J EUR CERAM SOC , 13 (2) 135 - 142.

Sousa, JJ; Sousa, A; Newton, JM; (1994) Factors influencing in-vitro drug release from coated pellets. In: Jornal of Pharmacy and Pharmacology. (pp. 1084 - ?). Pharmaceutical Society of Great Britain: London, UK.

STONE, CR; MENDIS, KJS; LADOMMATOS, N; (1994) ENERGY BALANCE IN A NATURAL GAS FUELLED SPARK IGNITION ENGINE - MEASUREMENTS AND MODELLING. In: COMBINED HEAT AND POWER. (pp. 183 - 193). MECHANICAL ENGINEERING PUBL

SUTANANTA, W; CRAIG, D; NEWTON, J; (1994) AN INVESTIGATION INTO THE EFFECT OF PREPARATION CONDITIONS ON THE STRUCTURE AND MECHANICAL-PROPERTIES OF PHARMACEUTICAL GLYCERIDE BASES. INTERNATIONAL JOURNAL OF PHARMACEUTICS , 110 (1) 75 - 91. 10.1016/0378-5173(94)90377-8.

SUTANANTA, W; CRAIG, D; NEWTON, J; (1994) THE EFFECTS OF AGING ON THE THERMAL-BEHAVIOR AND MECHANICAL-PROPERTIES OF PHARMACEUTICAL GLYCERIDES. INTERNATIONAL JOURNAL OF PHARMACEUTICS , 111 (1) 51 - 62. 10.1016/0378-5173(94)90401-4.

SVILAINIS, L; MAHLOUJI, H; SAFFARI, N; (1994) Signal processing for ultrasonic imaging of composites. In: Saffari, N, (ed.) INSPECTION OF STRUCTURAL COMPOSITES, CONFERENCE PROCEEDINGS 1994. (pp. 129 - 145). BENTHAM PRESS

Svilainis, L; Mahlouji, M; Saffari, N; (1994) Signal Processing for Ultrasonic Imaging of Composites. In: Saffari, N, (ed.) (Proceedings) Inspection of Structural Composites. (pp. 136 - 153). Bentham Press: London.

T

Taylor, KM; Newton, JM; (1994) Liposomes as a vehicle for drug delivery. Br J Hosp Med , 51 (1-2) 55 - 60.

Timsina, MP; Martin, GP; Marriott, C; Ganderton, D; Yianneskis, M; (1994) Drug delivery to the respiratory tract using dry powder inhalers. International Journal of Pharmaceutics , 101 (1-2) 1 - 13. 10.1016/0378-5173(94)90070-1.

V

Venthoye, G; Taylor, KMG; Newton, JM; Johnson, MCR; (1994) P261 calorimetric investigation of spray dried salbutamol sulphate. European Journal of Pharmaceutical Sciences , 2 (1-2) 184 - 184. 10.1016/0928-0987(94)90434-0.

Y

YU, GE; FINCH, D; EDIRISINGHE, M; PARRICK, J; RALPH, B; CLARK, D; (1994) THERMAL COMPOSITION OF A COPOLYMER OF METHYLCYCLOSILOXANES AND METHYLCYCLOSILAZANES TO NONOXIDE CERAMICS. In: Barron, AR and Fischman, GS and Fury, MA and Hepp, AF, (eds.) COVALENT CERAMICS II: NON-OXIDES. (pp. 201 - 206). MATERIALS RESEARCH SOC

YU, GE; PARRICK, J; EDIRISINGHE, M; FINCH, D; RALPH, B; (1994) SYNTHESIS OF SILICON OXYNITRIDE FROM A POLYMERIC PRECURSOR .2. THE FORMATION OF TRIMETHYLCYCLOTRISILAZANE AND TETRAMETHYLCYCLOTETRASILAZANE FROM THE AMMONOLYSIS OF DICHLOROMETHYLSILANE IN DIETHYL-ETHER. J MATER SCI , 29 (6) 1680 - 1685.

YU, GE; PARRICK, J; EDIRISINGHE, M; FINCH, D; RALPH, B; (1994) SYNTHESIS OF SILICON OXYNITRIDE FROM A POLYMERIC PRECURSOR .3. POLYMERIZATION AND COPOLYMERIZATION OF METHYLCYCLOSILOXANES AND METHYLCYCLOSILAZANES. J MATER SCI , 29 (21) 5569 - 5575.

Z

Zangeneh, M; (1994) Inverse design of centrifugal compressor vaned diffusers in inlet shear flows. American Society of Mechanical Engineers (Paper) 1 - 10.

ZANGENEH, M; (1994) INVISCID-VISCOUS INTERACTION METHOD FOR 3-DIMENSIONAL INVERSE DESIGN OF CENTRIFUGAL IMPELLERS. In: JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME. (pp. 280 - 290). ASME-AMER SOC MECHANICAL ENG

Zangeneh, M; Goto, A; Takemura, T; (1994) Suppression of secondary flows in a mixed-flow pump impeller by application of 3D inverse design method: part 1 - design and numerical validation. American Society of Mechanical Engineers (Paper) 1 - 10.

This list was generated on Sun Dec 14 18:52:36 2014 GMT.