UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

Browse by UCL Departments and Centres

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Author | Type
Jump to: A | B | C | D | E | G | H | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items: 110.

A

Al-Hussaini, H and Suen, KO (1998) Using shallow solar ponds as a heating source for greenhouses in cold climates. ENERG CONVERS MANAGE , 39 (13) 1369 - 1376.

Al-Nasassrah, MA and Podczeck, F and Newton, JM (1998) The effect of an increase in chain length on the mechanical properties of polyethylene glycols. EUR J PHARM BIOPHARM , 46 (1) 31 - 38.

Aldrich, DE and Edirisinghe, MJ (1998) Addition of copper particles to an alumina matrix. J MATER SCI LETT , 17 (12) 965 - 967.

Ambros, MC and Podczeck, F and Podczeck, H and Newton, JM (1998) The characterization of the mechanical strength of chewable tablets. Pharm Dev Technol , 3 (4) 509 - 515. 10.3109/10837459809028633.

Andrews, DJ (1998) A comprehensive methodology for the design of ships (and other complex systems). P R SOC A , 454 (1968) 187 - 211.

Andrews, DJ and Bayliss, JA (1998) Computer aided topside integration for concept design. In: (Proceedings) RINA Warship.

Andrews, DJ and Kirkpatrick, DL (1998) Design related issues in defence procurement. In: (Proceedings) Royal Aero Society conference on directing and managing cost effective design.

Asvapoositkul, W and Zangeneh, M (1998) A time-marching method for the calculation of nonsimilar 3D boundary layers on turbomachinery blades. J FLUID ENG-T ASME , 120 (4) 799 - 807.

B

Bucknall, RWG and Nightingale, CJE and Sulaimi, A (1998) City bus network based on distributed charging stations and on-board energy storage. In: (Proceedings) 31st ISATA, Dusseldorft.

Bao, X and Edirisinghe, MJ (1998) Use of trichlorophenylsilane in the synthesis of polymeric precursors for silicon carbide. J MATER SCI LETT , 17 (19) 1641 - 1643.

Bao, X and Edirisinghe, MJ and Fernando, GF and Folkes, MJ (1998) Synthesis of silicon carbide from polysilanes: effect of hydrosilane and vinyl groups. BRIT CERAM T , 97 (6) 253 - 258.

Bao, XJ and Edirisinghe, MJ and Fernando, GF and Folkes, MJ (1998) Precursors for silicon carbide synthesised from dichloromethylsilane derivatives. J EUR CERAM SOC , 18 (7) 915 - 922.

Basit, AW and Newton, JM and Lacey, LF (1998) The effect of polyethylene glycol 400 (PEG 400) on gastrointestinal transit. Journal of Pharmacy and Pharmacology , 50 (SUPPL. 9) 97 - 97.

Basit, AW and Newton, JM and Lacey, LF (1998) The effect of polyethylene glycol 400(PEG400) on gastrointestinal transit. In: Journal of Pharmacy and Pharmacology. (pp. S97 - S97). Pharmaceutical Press: London, UK.

Bolton, MTW and Adams, GH and Bucknall, RWG (1998) Energy storage in the electric warship. In: (Proceedings) First International Conference on Energy Storage Systems and Applications. : Chester.

Bryce, DJ and Zhao, H and Ladommatos, N (1998) Experimental studies of soot formation in laminar diffusion flames using laser-induced incandescence. In: (Proceedings) Control of Flames and Combustion Processes, Guernsey.

Bush, JWM and Eames, I (1998) Fluid displacement by bubbles rising in a thin gap. International Journal of Multiphase Flows , 24 411 - 430.

Bush, JWM and Eames, I (1998) Fluid displacement by high Reynolds number bubble motion in a thin gap. International Journal of Multiphase Flow , 24 (3) 411 - 430.

C

Calleya, J and Greig, A and Pawling, R and Bucknall, RWG (1998) Assessing the dependence of carbon dioxide emission reduction potential of natural gas on the size and topology of container carriers and other ship types. In: (Proceedings) Gas Fuelled Ships 2011.

Calnan, P and Zhao, H and Ladommatos, N and Ma, T (1998) Phenomenological model analysis of charge stratification configurations. In: (Proceedings) Power Train and Hybrid Vehicles, Institution of Mechanical Engineers. (pp. 159 - 181). : London.

Calnan, PCC and Zhao, H and Ladommatos, N and Ma, T (1998) Analysis of axial stratification on Sl engine performance and emissions. In: INTERNATIONAL CONFERENCE ON COMBUSTION ENGINES AND HYBRID VEHICLES. (pp. 159 - 181). PROFESSIONAL ENGINEERING PUBLISHING LTD

D

Dalziel, SB and Eames, I (1998) Resuspension by impacting bodies. In: UNSPECIFIED (183 - 186).

Diaz, P and Ralph, B and Edirisinghe, MJ (1998) Transmission electron microscope characterization of a plasma-sprayed ZrO2-Y2O3-TiO2 thermal barrier coating. MATER CHARACT , 41 (2-3) 55 - 67.

E

Etube, L.S. (1998) Variable amplitude corrosion fatigue and fracture mechanics of weldable high strength jack-up steels. Doctoral thesis, University of London.
An open access version is available from UCL Discovery
 file

EAMES, I and Flor, JB (1998) Fluid transport by dipolar vortices. Dynamics of Atmospheres and Oceans , 28 93 - 105.

Edirisinghe, MJ (1998) Solid freeform fabrication methods for engineering ceramics. BRIT CERAM T , 97 (6) 283 - 286.

Edirisinghe, MJ (1998) Solid freeform fabrication methods for engineering ceramics. In: Binner, J and Yeomans, J, (eds.) BETTER CERAMICS THROUGH PROCESSING. (pp. 125 - 132). IOM COMMUNICATIONS LTD

Edirisinghe, MJ (1998) Solid freeform fabrication of ceramics. In: Srivatsan, TS and Khor, KA, (eds.) PROCESSING AND FABRICATION OF ADVANCED MATERIALS VII. (pp. 139 - 149). MINERALS, METALS & MATERIALS SOC

Engja, H and Flower, J and Bucknall, RWG and Mattick, D and Atherton, M (1998) Application of bond graphs for mathematical modelling and simulation of marine engineering systems. Transactions of the Institute of Marine Engineers , 110 (4) 229 - 239.

Etube, LS and Brennan, FP and Dover, WD (1998) Prediction of fatigue crack growth in offshore structures using a sea state equivalent stress concept. In: (Proceedings) Proc. of 8th International Offshore and Polar Engineering Conference, Montreal, Canada. (pp. 95 - 101).

Etube, LS and Myers, P and Brennan, FP and Dover, WD and Stacey, A (1998) Constant and variable amplitude corrosion fatigue of a high strength jack-up steel. In: (Proceedings) Proc. of 8th International Offshore and Polar Engineering Conference, Montreal, Canada. (pp. 123 - 130).

G

Godfrey, A and Miodownik, MA and Jensen, DJ and Martin, JW (1998) Measuring growth kinetics of individual grains during secondary recrystallisation using an in-situ neutron diffraction technique. In: GRAIN GROWTH IN POLYCRYSTALLINE MATERIALS III. (pp. 417 - 422).

Goto, A and Zangeneh, M (1998) Hydrodynamic design of pump diffuser using inverse design method and CFD. In: (Proceedings) 1998 ASME Fluids Engineering Division Summer Meeting, Washington D.C. ASME paper FEDSM98-4854

Greig, AR (1998) Chapter 8: Basics of motion control. In: Surface support of subsea activities: Dynamics and control in harsh environments. WEGEMT

Greig, AR (1998) Chapter 9: Active control systems. In: Surface support of subsea activities: Dynamics and control in harsh environments. WEGEMT

Greig, AR and Bucknall, RWG (1998) Marine engineering the trimaran hull form - Opportunities and constraints. International Maritime Technology , 110 (3) 181 - 193.

Greig, AR and Bucknall, RWG (1998) Packing power into a tight space – how to marine engineer a trimaran. The Marine Engineers Review , MER1998-05 (May 1998)

Guerrier, MP and Williams, PA and Greig, AR and Fry, MD and Allnutt, AJ (1998) The development of phosphorescent particle tracking (PPT) to visualize the interaction of gas flow streams within the cylinder of an IC engine. In: (Proceedings) Proc. 4th International Conference on Optical Methods and Data Processing in Heat and Fluid Flow, London, UK. (pp. 387 - 396). IMechE Publication No. C541/031/98

H

Halfpenny, A. (1998) Dynamic analysis of both on and offshore wind turbines in the frequency domain. Doctoral thesis, University of London.
An open access version is available from UCL Discovery
 file

Hu, P and Zangeneh, M (1998) Analysis of 3D viscous flow through a water-jet intake duct under different operating conditions. In: (Proceedings) 1998 ASME Fluids Engineering Division Summer Meeting, Washington D.C. ASME paper FEDSM98-4855

Huang, J and Wang, M and Best, SM and Tanner, KE and Bonfield, W (1998) Evaluation of Bioglass® and hydroxyapatite reinforced polyethylene composites after ageing in simulated body fluid. In: LeGeros, RZ and LeGeros, JP, (eds.) (Proceedings) The 11th International Symposium on Ceramics in Medicine. (pp. 165 - 168). World Scientific

Humaura, T and Newton, JM (1998) Glass transition temperature in ternary systems. In: (Proceedings) AGPI/APV 2nd World Meeting on Pharmaceutics, Biopharmaceutics, Pharmaceutical Technology. (pp. 33 - 34). : Paris.

K

Kerr, S.C. (1998) Human induced loading on staircases. Doctoral thesis, University of London.
An open access version is available from UCL Discovery
 file

Kouimzi, M and Pinney, RJ and Newton, JM (1998) The survival of freeze dried Lactobacillus Acidophilus in microcrystalline cellilose tablets. In: PharmSci Supplement. (pp. 1298 - 1298). American Association of Pharmaceutical Science: USA.

L

Ladommatos, N and Abdelhalim, S and Zhao, H (1998) Control of oxides of nitrogen from diesel engines using diluents while minimising the impact on particulate pollutants. APPLIED THERMAL ENGINEERING , 18 (11) 963 - 980.

Ladommatos, N and Abdelhalim, S and Zhao, H (1998) Effects of carbon dioxide dilution on diesel exhaust emissions. In: (Proceedings) Proceedings UK-Korea Joint Seminar on International Combustion Engines. : Seoul.

Ladommatos, N and Abdelhalim, S and Zhao, H (1998) Effects of EGR on heat release analysis. In: SAE 980184. SAE

Ladommatos, N and Abdelhalim, S and Zhao, H (1998) Investigations on high-speed direct-injection diesel engines. In: (Proceedings) UnICEG Autumn Meeting.

Ladommatos, N and Abdelhalim, S and Zhao, H (1998) The effects on diesel combustion and emissions of reducing inlet charge mass due to thermal throttling with hot EGR. In: SAE 980185. SAE

Ladommatos, N and Abdelhalim, S and Zhao, H and Hu, Z (1998) The dilution, chemical, and thermal effects of exhaust gas recirculation on diesel engine emissions - Part 4: effects of carbon dioxide and water vapour. In: SAE 971660. SAE

Ladommatos, N and Abdelhalim, SM and Zhao, H (1998) Effects of exhaust gas recirculation temperature on diesel engine combustion and emissions. P I MECH ENG D-J AUT , 212 (D6) 479 - 500.

Ladommatos, N and Abdelhalim, SM and Zhao, H and Hu, Z (1998) The effects of carbon dioxide in exhaust gas recirculation on diesel engine emissions. P I MECH ENG D-J AUT , 212 (D1) 25 - 42.

Ladommatos, N and Rose, D (1998) Measurements of in-cylinder mixture strength and fuel accumulation in the inlet port of a gasoline-injected engine during very rapid throttle openings. P I MECH ENG D-J AUT , 212 (D2) 103 - 118.

Lundqvist, A and Podczeck, F and Newton, JM (1998) Compaction of and drug release from coated pellets mixed with other pellets. In: (Proceedings) AGPI/APV 2nd World Meeting on Pharmaceutics, Biopharmaceutics, Pharmaceutical Technology. (pp. 461 - 462). : Paris.

Lundqvist, AEK and Podczeck, F and Newton, JM (1998) Compaction of, and drug release from, coated drug pellets mixed with other pellets. EUR J PHARM BIOPHARM , 46 (3) 369 - 379.

M

Ma, Q. (1998) Numerical simulation of nonlinear interaction between structures and steep waves. Doctoral thesis, University of London.
An open access version is available from UCL Discovery
 file

Ma, QW and Wu, GX and Eatock Taylor, R (1998) Numerical simulation of sloshing waves in a 3D tank. In: (Proceedings) 13th International Workshop on Water Waves and Floating Bodies, Alphen aan den Rijn, The Netherlands.

Miodownik, M (1998) A Monte Carlo model of Zener Pinning which shows f(-1) dependence. In: GRAIN GROWTH IN POLYCRYSTALLINE MATERIALS III. (pp. 283 - 288).

Miodownik, MA and Wilkinson, AJ and Martin, JW (1998) On the secondary recrystallisation of Ma754. ACTA MATERIALIA , 46 (8) 2809 - 2821. 10.1016/S1359-6454(97)00460-6.

Mitchell, CL and Newton, JM and Podczeck, F and Evans, DF (1998) Studying the gastric emptying process of food using electrical impedance tomography. In: (Proceedings) AGPI/APV 2nd World Meeting on Pharmaceutics, Biopharmaceutics Pharmaceutical Technology. (pp. 1199 - 1200). : Paris.

N

Nadarajah, S and Balabani, S and Tindal, MJ and Yianneskis, M (1998) The effect of swirl on the annular flow past an axisymmetric poppet valve. P I MECH ENG C-J MEC , 212 (6) 473 - 484.

Nadarajah, S and Balabani, S and Tindal, MJ and Yianneskis, M (1998) The turbulence structure of the annular non-swirling flow past an axisymmetric poppet valve. P I MECH ENG C-J MEC , 212 (6) 455 - 471.

Newton, JM and Podczeck, F and Lai, S and Daumesnil, R (1998) The design of an expert system to aid tthe development of capsule formulation. In: Hashida, M, (ed.) Formulation Design of Oral Dosage Forms. (236 - 270). Yakugyo Joiho: Tokyo, Japan.

Newton, JM and Podczeck, F and Lai, S and Daumesnil, R (1998) The design of an expert system to aid the development of capsule formulations. In: 橋田充,, (ed.) 経口投与製剤の処方設計 (Formulation design of oral dosage forms). (236 - 244). Yakugyo Jiho: Tokyo.

O

Ong, CS and Saffari, N (1998) Ultrasonic evaluation of ultra-high molecular weight polyethylene used in medical prostheses. P I MECH ENG H , 212 (H1) 65 - 69.

P

Patel, R and Greig, AR and Broome, DR (1998) Segmentation of 3D acoustic images for object recognition purposes. In: (Proceedings) IEEE OCEANS '98 Conference, Nice, France.

Pinto, JF and Newton, JM (1998) Preparation of rapid disintegrating tablets from pellets produced by extrusion and spheronisation. In: CD ROM 95/1-8 ISSBN 0 85295 401 8.

PODCZECK, F (1998) UNSPECIFIED Int. J. Pharm. , 160 119 - 130.

Podczeck, F (1998) Adhesion forces in interactive powder mixtures of a micronized drug and carrier particles of various particle size distributions. J ADHES SCI TECHNOL , 12 (12) 1323 - 1339.

Podczeck, F (1998) Evaluation of the adhesion properties of salbutamol sulphate to inhaler materials. PHARMACEUT RES , 15 (5) 806 - 808.

Podczeck, F (1998) Letter to the editor [1]. Pharmazie , 53 (3) 199 - 199.

Podczeck, F (1998) Measurement of surface roughness of tablets made from polyethylene glycol powders of various molecular weight. Pharmacy and Pharmacology Communications , 4 (4) 179 - 182.

Podczeck, F (1998) Particle-particle adhesion in pharmaceutical powder handling. Imperial College Pr: London, UK.

Podczeck, F (1998) Relationship between centrifugal adhesion measurements and aerosol performance of dry powder inhalations. Journal of Aerosol Science , 29 (SUPPL.2) S755 - S756.

Podczeck, F (1998) The relationship between physical properties of lactose monohydrate and the aerodynamic behaviour of adhered drug particles. INT J PHARM , 160 (1) 119 - 130.

Podczeck, F (1998) Untitled. PHARMAZIE , 53 (3) 199 - 199.

Podzceck, F and Ambros, MC and Newton, JM and Podczeck, H (1998) Evaluation of the mechanical strength properties of chewable tablets. In: (Proceedings) AGPI/APV 2nd World Meeting On Pharmaceutics, Biopahmaceutics,Pharmaceutical Technology. (pp. 235 - 236). : Paris, France.

R

Rodriguez, JE and Brennan, FP and Dover, WD (1998) Minimization of stress concentration factors in fatigue crack repairs. International Journal of Fatigue , 20 (10) 719 - 725.

S

Sadler, M and Stokes, J and Edwards, SP and Zhao, H and Ladommatos, N (1998) Optimization of the combustion system for a direct injection gasoline engine, using a high-speed in-cylinder sampling valve. In: FUTURE ENGINE AND SYSTEM TECHNOLOGIES. (pp. 139 - 156). PROFESSIONAL ENGINEERING PUBLISHING LTD

Saffari, N and Ong, CS (1998) Lamb wave imaging and V(z) using a broadband system. In: Thompson, DO and Chimenti, DE, (eds.) REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 17A AND 17B. (pp. 1291 - 1298). PLENUM PRESS DIV PLENUM PUBLISHING CORP

Salako, M and Podczeck, F and Newton, JM (1998) Investigations into the deformability and tensile strength of pellets. INT J PHARM , 168 (1) 49 - 57.

Song, JH and Evans, JRG and Edirisinghe, MJ and Twizell, EH (1998) Multiparameter mapping of polymer properties for fast thermolysis of powder moldings. J APPL POLYM SCI , 70 (3) 545 - 557.

Sousa, JJ and Sousa, A and Podczeck, F and Newton, JM (1998) Influence of core materials on drug release profile. In: PharmSci Supplement. (pp. 1299 - 1299). AAPS

Sousa, JJ and Sousa, A and Podczeck, F and Newton, JM (1998) Influence of core materials solubility on drug release profile. In: PharmSci Supplement. (pp. 1299 - 1299). American Assocation of Pharmaceutical Sciences: USA.

T

Teng, WD and Edirisinghe, MJ (1998) Development of ceramic inks for direct continuous jet printing. J AM CERAM SOC , 81 (4) 1033 - 1036.

Teng, WD and Edirisinghe, MJ (1998) Development of continuous direct ink jet printing of ceramics. BRIT CERAM T , 97 (4) 169 - 173.

Tiow, W and Zangeneh, M (1998) A viscous transonic inverse design method for turbomachinery blades. In: (Proceedings) 43rd ASME International Gas Turbine and Aeroengine Congress and Exposition, Stockholm, Sweden. ASME paper 98-GT-125

Tiow, WT and Zangeneh, M (1998) Viscous transonic inverse design method for turbomachinery blades. Part I: 2D cascades. American Society of Mechanical Engineers (Paper) (GT)

Tomer, G and Newton, JM (1998) Evaluating water movement in extrusion/spheronisation formualtions by a centifuge technique. In: PramSci Supplement. (pp. 1298 - 1298). AAPS

W

Wan, DC and Dai, SQ and Wu, GX (1998) Interactions between bores and bodies. In: (Proceedings) 3rd International Conference of Nonlinear Mechanics (ICNM-III), Shanghai, China.

Williams, HM and Evans, JRG and Shemilt, JE and Edirisinghe, MJ (1998) Film blowing of ceria electrolyte plates. MATER MANUF PROCESS , 13 (1) 147 - 158.

Wilson, D and Greig, A and Gilby, J and Smith, R (1998) Some problems in trying to implement uncertainty techniques in automated inspection. In: Hunter, A and Parsons, S, (eds.) Applications of Uncertainty Formalisms. (225 - 241). Springer

Wu, GX and Ma, QW and Eatock Taylor, R (1998) Numerical simulation of sloshing waves in a 3D tank based on a finite element method. Applied Ocean Research , 20 (6) 337 - 355.

Y

Yiu, KFC and Zangeneh, M (1998) 3D automatic optimization strategy for design of centrifugal compressor impeller blades. In: American Society of Mechanical Engineers (Paper).

Yiu, KFC and Zangeneh, M (1998) On the simultaneous design of blade and duct geometry of marine ducted propulsors. J SHIP RES , 42 (4) 274 - 296.

Z

Zangeneh, M (1998) CENTRIFUGAL OR MIXED FLOW TURBOMACHINERY. JP 10504621 (T).

Zangeneh, M (1998) On 3D inverse design of centrifugal compressor impellers with splitter blades. In: American Society of Mechanical Engineers (Paper).

Zangeneh, M (1998) On role of 3D inverse design methods in turbomachinery shape optimization. In: (Proceedings) IMechE Seminar on the Successful Exploitation of CFD in Turbomachinery Design, London. (pp. 1 - 12).

Zangeneh, M and Goto, A (1998) TURBOMACHINERY AND METHOD OF MANUFACTURING THE SAME. EP 0865577 (A1).

Zangeneh, M and Goto, A and Harada, H (1998) On the design criteria for suppression of secondary flows in centrifugal and mixed flow impellers. J TURBOMACH , 120 (4) 723 - 735.

Zhang, JW and Andrews, DJ (1998) Manoeuvrability performance of a trimaran ship. In: (Proceedings) International Conference on High Speed Craft Motions and Manoeuvrability, RINA, London.

Zhao, H and Ladommatos, N (1998) Optical diagnostics for in-cylinder mixture formation measurements in IC engines. PROG ENERG COMBUST , 24 (4) 297 - 336.

Zhao, H and Ladommatos, N (1998) Optical diagnostics for soot and temperature measurement in diesel engines. PROG ENERG COMBUST , 24 (3) 221 - 255.

This list was generated on Thu May 23 12:08:58 2013 BST.