Browse by UCL Departments and Centres
![]() | Up a level |
Group by: Author | Type
Number of items: 87.
A
| Aleiferis, PG and Taylor, AMKP and Whitelaw, JH and Ishii, K and Urata, Y (2000) Cyclic Variations of Initial Flame Kernel Growth in a Honda VTEC-E Lean-Burn Spark-Ignition Engine. SAE Transactions, Journal of Engines , 109 (3) , Article 2000-01-1207. 10.4271/2000-01-1207. |
| Andrews, DJ (2000) Future warship design and the prospects for trimaran warships. In: (Proceedings) RINA International Conference R.V.TRITON: Trimaran Demonstrator Project, Solent Conference Centre, Southampton, April. |
B
| Bao, X and Edirisinghe, M (2000) Novel Polymeric Precursor Routes for the Preparation of SiC-Si3N4 Composites. Materials Technology , 15 137 - 142. |
| Bao, X and Nangrejo, MR and Edirisinghe, MJ (2000) Preparation of silicon carbide foams using polymeric precursor solutions. J MATER SCI , 35 (17) 4365 - 4372. |
| Bao, XJ and Edirisinghe, MJ (2000) Novel polymeric precursor routes for the preparation of silicon carbide silicon nitride composites. MATER TECHNOL , 15 (2) 137 - 142. |
| Bao, XJ and Edirisinghe, MJ (2000) Polycyclodisilazane: a new polymeric precursor for silicon nitride-based ceramics. J MATER CHEM , 10 (2) 395 - 401. |
| Belu, AM and Davies, MC and Newton, JM and Patel, N (2000) TOF-SIMS characterization and imaging of controlled-release drug delivery systems. Analytical Chemistry , 72 (22) 5625 - 5638. |
| Blackman, S and Rivas, S and Greig, AR and Tizani, W and Whitehead, A and Bertaso, D (2000) Automated FCAW for tubular structures. In: (Proceedings) International Conference on Advances in Welding Technology 2000, Gas Metal Arc Welding for the 21st Century, Orlando, USA, 6-8 December. (pp. 269 - 278). |
| Booth, SW and Clarke, A and Newton, JM (2000) Spheronised self-emulsifyimg systems for hydrophobic and water sensitive drugs. |
| Bryce, DJ and Ladommatos, N and Zhao, H (2000) Quantitative investigation of soot distribution by laser-induced incandescence. APPL OPTICS , 39 (27) 5012 - 5022. |
| Bucknall, RWG and Greig, AR and Patel, P and Geertsma, RD and Bernier, N (2000) The role of simulation in marine engineering design in the 21st century. In: IMarE INEC2000. IMarE |
| Bucknall, RWG and Greig, AR and Patel, R and Geertsma, RD and Bernier, N (2000) The role of simulation in marine engineering design in the 21st century. In: (Proceedings) Proceedings of 5th International Naval Engineering Conference, INEC 2000, Hamburg, 14-16 March. (pp. 163 - 171). I.Mar.E. |
| Bucknall, RWG and van Greithuysen, WJ (2000) Electrical propulsion of naval and merchant vessls. In: (Proceedings) Lloyds List Conference: Ship Propulsion Systems, Manchester, December. |
| Burriesci, G (2000) Influenza della geometria dei lembi sullo stato di tensione delle bioprotesi cardiache. In: (Proceedings) XXIX National Congress of AIAS - Stress Analysis Italian Association. (pp. 801 - 809). : Lucca, Italy. |
C
| Calnan, P and Zhao, H and Ladommatos, N and Ma, T (2000) The influence of dilution composition and temperature upon a stratified charge spark ignition engine. SAE Transactions: Journal of Fuels and Lubricants (SAE 2000-01-1947) |
| Carlisle, C and Curlewis, A and Snelling, P and Bucknall, RWG and van Greithuysen, WJ (2000) Exploration of a trimaran based concept for a fast sea-lift logistics ship. In: (Proceedings) Proceedings of Warship 2000 - Warships for Amphibious Operations and Minewarfare, The Royal Insititution of Naval Architects, London, 6-7 June. (pp. 1 - 13). |
| Chiwele, I and Jones, BE and Podczeck, F (2000) The shell dissolution of various empty hard capsules. CHEM PHARM BULL , 48 (7) 951 - 956. |
| Colbourne, D and Suen, KO (2000) Assessment of performance of hydrocarbon refrigerants. In: (Proceedings) Proceedings of the IIR Natrual Working Fluids Gustav Lorenzten Conference, Purdue, USA. |
D
| Dover, WD and Brennan, FP and Etube, LS (2000) Structural integrity monitoring using alternating current field measurements. In: (Proceedings) Proceedings of 5th International Conference on Engineering Structural Integrity Assessment, Structural Integrity in the 21st Century, 19-21 September. |
E
| Eames, I and Dalziel, SB (2000) Dust resuspension by the flow around an impacting sphere. J FLUID MECH , 403 305 - 328. 10.1017/S0022112099007120. |
| Eames, I and Gilbertson, MA (2000) Aerated granular flow over a horizontal rigid surface. J FLUID MECH , 424 169 - 195. 10.1017/S0022112000001920. |
F
| Fricke, W and Berge, S and Brennan, FP and Cui, W and Josefson, L and Kierkegaard, H and Kihl, D and Koval, M and Mikkola, TP and Parmentier, G and Tpyosada, M and Yoon, JH (2000) Reply to the discussion of the report of Committee III.2, Fatigue and Fracture. In: (Proceedings) Proceedings of 13th International Ship and Offshore Structures Congress, ISSC 2000, Nagasaki, Japan. (pp. 133 - 141). |
| Fricke, W and Berge, S and Brennan, FP and Cui, W and Josefson, L and Kierkegaard, H and Kihl, D and Koval, M and Mikkola, TP and Parmentier, G and Tpyosada, M and Yoon, JH (2000) Report of Committee III.2, Fatigue and Fracture. In: (Proceedings) Proceedings of 13th International Ship and Offshore Structures Congress, ISSC 2000, Nagasaki, Japan. (pp. 323 - 392). |
| Fromme, P and Sayir, MB (2000) Experimental detection of cracks at rivets using structural wave propagation. In: NDT.net - The e-Journal of Nondestructive Testing. |
H
| Haririan, I and Tajkey, J and Newton, JM (2000) Determination of mechanical strength of different material double-layer rectangular tablets. Daru , 8 (3-4) 20 - 25. |
| Hu, Z.Z. (2000) Numerical simulation of laminar separated flows on adaptive tri-tree grids with the finite volume method. Doctoral thesis, University of London . |
| Huang, J and Di Silvio, L and Kayser, M and Bonfield, W (2000) TEM examination of the interface between Bioglass (R)/polyethylene composites and human osteoblast cells in vitro. BIOCERAMICS , 192-1 649 - 652. |
K
| Konstantinidis, E and Castiglia, D and Balabani, S and Yianneskis, M (2000) On the flow and vortex shedding characteristics of an in-line tube bundle in steady and pulsating crossflow. CHEM ENG RES DES , 78 (A8) 1129 - 1138. |
L
| Lunn, M and Bucknall, RWG (2000) Fuel Cells. Journal of Naval Engineering , 39 (2) |
| Ladommatos, N and Abdelhalim, S and Zhao, H (2000) The effects of exhaust gas recirculation on diesel combustion and emissions. International Journal of Engine Research , 1 (1) 107 - 126. 10.1243/1468087001545290. |
| Ladommatos, N and Xiao, Z and Zhao, H (2000) Effects of fuels with a low aromatic content on diesel engine exhaust emissions. P I MECH ENG D-J AUT , 214 (D7) 779 - 794. |
| Ladommatos, N and Zhao, H and Bryce, DJ and Xiao, Z (2000) Fuel effects in soot formation and emissions. In: (Proceedings) 3rd Symposium towards clean diesel engines.. : Paris. |
| Lee, YS and Poynter, R and Podczeck, F and Newton, JM (2000) Development of a dual approach to assess powder flow from avalanching behavior. AAPS PharmSciTech , 1 (3) E21 - ?. 10.1208/pt010321. |
| Lee, YSL and Poynter, R and Podczeck, F and Newton, JM (2000) Development of a dual approach to assess powder flow from avalancing behavior. AAPS PharmSciTech , 1 (3) |
| Li, L and Papadopoulos, DP and Smith, FT and Wu, GX (2000) Water flow due to rapid analysis of nonlinear interactions between waves and bodies. In: (Proceedings) Proceedings of the IUTAM Symposium on Free-Surface Flows, Birmingham, UK, July. |
| Loh, PP and Bao, X and Nangrejo, MR and Edirisinghe, MJ (2000) Coating with amorphous silicon carbide using polymeric precursors. J MATER SCI LETT , 19 (7) 587 - 589. |
M
| Magnaudet, J and Eames, I (2000) The motion of high-reynolds-number bubbles in inhomogeneous flows. Annual Review of Fluid Mechanics , 32 659 - 708. |
| Miodownik, M and Holm, EA and Hassold, GN (2000) Highly parallel computer simulations of particle pinning: Zener vindicated. SCRIPTA MATERIALIA , 42 (12) 1173 - 1177. 10.1016/S1359-6462(00)00354-7. |
| Miodownik, MA and Holm, EA and Browne, DJ (2000) Modeling the effect of noise on multiscale dislocation cell structures. MULTISCALE PHENOMENA IN MATERIALS-EXPERIMENTS AND MODELING , 578 469 - 474. |
N
| Nangrejo, MR and Bao, X and Edirisinghe, MJ (2000) The structure of ceramic foams produced using polymeric precursors. J MATER SCI LETT , 19 (9) 787 - 789. |
| Nangrejo, MR and Bao, XJ and Edirisinghe, MJ (2000) Preparation of silicon carbide-silicon nitride composite foams from pre-ceramic polymers. J EUR CERAM SOC , 20 (11) 1777 - 1785. |
| Newton, JM (2000) Progress in pellets: Multiparticulate, multipurpose dosage forms. Pharmaceutical Technology Europe , 12 (5) 40 - 40. |
| Newton, JM and Haririan, I and Podczeck, F (2000) The determination of the mechanical properties of elongated tablets of varying cross section. EUR J PHARM BIOPHARM , 49 (1) 59 - 64. |
| Newton, JM and Haririan, I and Podczeck, F (2000) The influence of punch curvature on the mechanical properties of compacted powders. POWDER TECHNOL , 107 (1-2) 79 - 83. |
| Newton, JM and Podczeck, F (2000) The process of forming solid compacts by the application of pressure to a powder bed is not the preserve of pharmacy. Int J Pharm , 198 (2) 249 - 252. |
| Newton, JM and Podczeck, F (2000) Untitled. INT J PHARM , 198 (2) 249 - 250. |
| Newton, JM and Podczeck, F and Vachon, MG and Chulia, D (2000) Letter to the editor (multiple letters) [1]. International Journal of Pharmaceutics , 198 (2) 249 - 252. |
O
| Oakley, A and Zhao, H and Ladommatos, N and Ma, T (2000) Experimental studies on Controlled Auto-ignition (CAI) combustion in a 4-stroke gasoline engine. In: INTERNATIONAL CONFERENCE ON 21ST CENTURY EMISSIONS TECHNOLOGY. (pp. 163 - 174). PROFESSIONAL ENGINEERING PUBLISHING LTD |
| OSHIMA, M and TORII, R and TAKAGI, K (2000) 脳動脈瘤の計算力学. BME : bio medical engineering , 14 (10) 14 - 17. |
P
| Patel, RC and Greig, AR (2000) An object recognition system described as a hierarchical, multilevel system. In: (Proceedings) EUREL European Advanced Robotic Systems Master Class and Conference - Robotics 2000, Salford, UK, 12-14 April. (pp. 1 - 8). |
| Peleties, P and Brennan, FP (2000) Fatigue analysis of skewed T-joint welded plates. In: (Proceedings) Proc. 20th International Conference on Offshore Mechanics and Arctic Engineering, New Orleans, USA. |
| Podczeck, F (2000) The development of an instrumented tamp-filling capsule machine I Instrumentation of a Bosch GKF 400S machine and feasibility study. EUR J PHARM SCI , 10 (4) 267 - 274. |
| PODCZECK, F (2000) The shape of powder particles and its influence on powder handling. IFPRI: The Hague. |
| Podczeck, F and Newton, JM (2000) Powder and capsule filling properties of lubricated granulated cellulose powder. EUR J PHARM BIOPHARM , 50 (3) 373 - 377. |
R
| Ramanarayanan, B and Vivek Ross, S and Darvemula, U and Sujith, RI and Chakravarthy, SR (2000) Development of an Acoustically Excited Solid Waste Incinerator-- Part I: Liquid Fuel Ramjet Analog. In: (Proceedings) 38th Aerospace Sciences Meeting & Exhibit. : Reno, NV, USA. |
| Rashid, H and Tay, BY and Edirisinghe, MJ (2000) Dispersion of ceramic ink using an ultrasonic disruptor. J MATER SCI LETT , 19 (9) 799 - 801. |
| Rivas, S and Greig, AR (2000) Motion control and monitoring for automated welding of tubular nodes. In: (Proceedings) EUREL European Advanced Robotic Systems Master Class and Conference - Robotics 2000, Salford, UK, 12-14 April. (pp. 1 - 8). |
| Rivas, S and Greig, AR and Blackman, S and Bertaso, D (2000) Automated burr grinding repair of welds for an underwater environment. In: (Proceedings) EUREL European Advanced Robotic Systems Master Class and Conference - Robotics 2000, Salford, UK, 12-14 April. (pp. 1 - 8). |
S
| Saffari, N and Ong, CS and Moreau, B (2000) Ultrasonic characterization of porous plasma-sprayed bioceramic coatings. In: Thompson, DO and Chimenti, DE, (eds.) REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 19A AND 19B. (pp. 1317 - 1323). AMER INST PHYSICS |
| Siew, LF and Basit, AW and Newton, JM (2000) The potential of organic-based amylose-ethylcellulose film coatings as oral colon-specific drug delivery systems. AAPS PharmSciTech , 1 (3) E22 - ?. 10.1208/pt010322. |
| Siew, LF and Basit, AW and Newton, JM (2000) The properties of amylose-ethylcellulose films cast from organic-based solvents as potential coatings for colonic drug delivery. Eur J Pharm Sci , 11 (2) 133 - 139. |
| Song, JH and Edirisinghe, MJ and Evans, JRG and Twizell, EH (2000) Optimisation of heating rates in thermolytic debinding of ceramics. Journal of Materials Research , 15 449 - 457. |
| Song, JH and Evans, JRG and Edirisinghe, MJ and Twizell, EH (2000) Optimization of heating schedules in pyrolytic binder removal from ceramic moldings. J MATER RES , 15 (2) 449 - 457. |
| Stolkin, R and Hodgetts, M and Greig, A (2000) An EM / E-MRF Strategy for Underwater Navigation. In: Mirmehdi, M and Thomas, BT, (eds.) BMVC. British Machine Vision Association |
T
| Tay, BY and Rashid, H and Edirisinghe, MJ (2000) On the preparation of ceramic ink for continuous jet printing. J MATER SCI LETT , 19 (13) 1151 - 1154. |
| Torii, R and Oshima, M and Kobayashi, T and Takagi, K (2000) Numerical simulation system of blood flow-in the cerebral artery using CT image data. Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B , 66 (652) 3041 - 3048. |
V
| Vivek Ross, S and Rajesh, R and Ramanarayanan, B and Chakravarthy, SR (2000) Quasi Steady Fluctuation of a lifted laminar Diffusion Flame: Hysteresis. In: (Proceedings) National Conference on Air Breathing Engines and Aerospace Propulsion. : Hyderabad, India. |
W
| Wojcik, AG (2000) A method of improving adhesion to implants using UV light. |
| Wojcik, AG and Teo, TS (2000) Trilobite hydrodynamics. In: (Proceedings) Martech 2000 International Conference, Singapore, 12-15 September. |
X
| Xiao, Z and Ladommatos, N and Zhao, H (2000) The effect of aromatic hydrocarbons and oxygenates on diesel engine emissions. P I MECH ENG D-J AUT , 214 (D3) 307 - 332. |
Y
| Yiu, KFC and Zangeneh, M (2000) Three-dimensional automatic optimization method for turbomachinery blade design. J PROPUL POWER , 16 (6) 1174 - 1181. |
Z
| Zangeneh, M (2000) CENTRIFUGAL OR MIXED FLOW TURBOMACHINERY. DE 69420745 (T2). |
| Zangeneh, M (2000) Turbomachinery and method of manufacturing the same. JP 2000515944 (A). |
| Zangeneh, M and Goto, A and Harada, H (2000) Turbomachinery and method of manufacturing the same. US 6062819 (A). |
| Zhao, H and Hu, J and Ladommatos, N (2000) In-cylinder studies of the effects of CO2 in exhaust gas recirculation on diesel combustion and emissions. P I MECH ENG D-J AUT , 214 (D4) 405 - 419. |
| Zhao, H and Williams, J and Damiano, L and Bryce, D and Ladommatos, N and Ma, T (2000) Development of a specially designed optical engine and laser diagnostics for stratified charge and controlled auto-ignition combustion studies. In: INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL METHODS IN RECIPROCATING ENGINES. (pp. 151 - 165). PROFESSIONAL ENGINEERING PUBLISHING LTD |
| Zhao, H and Williams, J and Damiano, L and Ladommatos, N (2000) Visualisation of in-cylinder flow and controlled auto-ignition combustion in an optical engine. In: (Proceedings) International Conference on Flow Visualisation.. : Edinburgh. |


