UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

Browse by UCL Departments and Centres

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Author | Type
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | P | R | S | T | W | Z
Number of items: 123.

A

Andrews, D.J.; (2003) A creative approach to ship architecture. International Journal of Maritime Engineering , 145 (3) pp. 229-252. 10.3940/rina.ijme.2003.a3.9031.

Andrews, DJ; (2003) A Creative Approach to Ship Architecture. (Awarded RINA Medal 2004). Transactions of RINA, Part A: International Journal of Maritime Engineering , 145 (3) 229 - 252.

Andrews, DJ; (2003) Architectural considerations in carrier design. (Awarded the David Goodrich Prize). In: (Proceedings) Warship: Airpower at Sea. RINA: London.

Andrews, DJ; (2003) Integrating the ship design and construction lifecycle. In: (Proceedings) Construction Industry Computer Association Conference. : Cambridge.

Andrews, DJ; (2003) Marine design - requirement elucidation rather than requirement engineering. In: (Proceedings) International Marine Design Conference. IMDC: Athens.

Andrews, DJ; (2003) Naval surface ship. In: McGraw-Hill Yearbook of Science & Technology 2003. McGraw-Hill Professional: New York.

Andrews, DJ; (2003) Naval surface ship. McGraw-Hill Yearbook of Science & Technology. McGraw-Hill: New York.

Andrews, DJ; (2003) Re-engineering warship design and construction. Jane's Navy International , 108 (8) 19 - 25.

Andrews, DJ; Pawling, R; (2003) SURFCON - A 21st Century ship design tool. In: (Proceedings) International Marine Design Conference. IMDC: Athens.

B

Basanta, D; Bentley, PJ; Miodownik, MA; Holm, EA; (2003) Evolving cellular automata to grow microstructures. In: GENETIC PROGRAMMING, PROCEEDINGS. (pp. 1 - 10).

Bayliss, JA; (2003) A methodology for topside design and integration in preliminary warship design. Doctoral thesis, University of London. Green open access
file

Boomsma, K; Poulikakos, D; Ventikos, Y; (2003) Simulations of flow through open cell metal foams using an idealized periodic cell structure. International Journal of Heat and Fluid Flow , 24 (6) 825 - 834. 10.1016/j.ijheatfluidflow.2003.08.002.

Booth, SW; Clarke, A; Newton, JM; (2003) Spheronised self-emulsifying systems for hydrophoboc and water sensitive drugs. 6,630,150.

Boutsianis, E; Poulikakos, D; Ventikos, Y; Frauenfelder, T; Wildermuth, S; (2003) Anatomically accurate haemodynamic simulations of Abdominal Aortic Aneurysms. American Society of Mechanical Engineers, Bioengineering Division (Publication) BED , 55 61 - 62.

Boutsianis, E; Poulikakos, D; Ventikos, Y; Frauenfelder, T; Wildermuth, S; Dave, H; ... Turina, M; + view all (2003) Cardiovascular haemodynamic simulations of anatomically accurate coronaries. American Society of Mechanical Engineers, Bioengineering Division (Publication) BED , 55 59 - 60.

Brennan, FP; (2003) Report of Committee III.2, Fatigue and Fracture. In: (Proceedings) Proceedings of the 14th International Ship and Offshore Structures Congress. Elsevier Science: San Diego.

Bucknall, RWG; Freire, P; (2003) The Marine Engineer 2020: Afloat or Ashore? IMarEST Colloquia Series 2003 , 2003 (1)

Bucknall, RWG; Freire, P; (2003) Unmanned Cargo Ships - A 2020 Vision. In: (Proceedings) The Marine Engineer - Afloat or Ashore - IMarEST Colloquia series. IMarEST: London.

Bucknall, RWG; Martindale, HGA; Yap, EH; Zachos, T; (2003) Exploitation of remote area hydrocarbon reserves through offshore electric power generation: A technical and economical evaluation. In: (Proceedings) 38th International Universities Power Engineering Conference. (pp. 229 - 232). : Thessaloniki, Greece.

Burriesci, G; (2003) In-vivo and in-vitro assessment of wearing in mechanical heart valves. In: (Proceedings) 1st International Symposium "Addressing the dysfunction of medical devices for the cardiovascular system.

Burriesci, G; Carmody, CJ; Howard, CJ; Patterson, EA; (2003) Simulazione numerica del comportamento emodinamico del ventricolo sinistro con interazione fluido-struttura. In: (Proceedings) XXXII National Congress of AIAS - Stress Analysis Italian Association. (pp. n. 032 - ?).

C

Carmody, CJ; Burriesci, G; Howard, IC; Patterson, EA; (2003) The use of LS-DYNA fluid-structure interaction to simulate fluid-driven deformation in the aortic valve. In: (Proceedings) 4th European LS-DYNA Conference. (pp. I-I-11 - I-I-20). DYNAmore GmbH: Stuttgart.

Chaniotis, AK; Poulikakos, D; Ventikos, Y; (2003) Dual pulsating or steady slot jet cooling of a constant heat flux surface. Journal of Heat Transfer , 125 (4) 575 - 586. 10.1115/1.1571093.

Charlesworth, DJ; Zangeneh, M; (2003) Pressure correction on unstructured meshes using high order convective modelling. In: Proceedings of the ASME/JSME Joint Fluids Engineering Conference. (pp. 1293 - 1305).

Chatziprodromou, I; Butty, VD; Poulikakos, D; Ventikos, Y; Makhijani, VB; (2003) Pulsatile Blood Flow in Anatomically Accurate Vessels with Multiple Aneurysms: A Medical Intervention Planning Application of Computational Haemodynamics. Flow, Turbulence and Combustion , 71 (1-4) 333 - 346.

Ciaramella, KM; Bucknall, RWG; (2003) Potential use of matrix converters in marine propulsion applications. In: (Proceedings) AES Broadening the Horizons: New ideas, new applications, new markets for marine electrical technologies - IMarEST Conference Proceedings part D. (pp. 133 - 142). IMarEST: London.

Ciaramella, KM; Bucknall, RWG; (2003) Potential use of matrix converters in marine propulsion applications. Institute of Marine Engineering, Science and Technology, IMarEST - Conference Proceedings 139 - 148.

Colbourne, D; Suen, KO; (2003) Equipment design and installation features to disperse refrigerant releases in rooms - part I: experiments and analysis. INT J REFRIG , 26 (6) 667 - 673. 10.1016/S0140-7007(03)00027-6.

Colbourne, D; Suen, KO; (2003) Equipment design and installation features to disperse refrigerant releases in rooms - part II: determination of procedures. INT J REFRIG , 26 (6) 674 - 680. 10.1016/S0140-7007(03)00026-4.

Colbourne, D; Suen, KO; Ritter, TJ; (2003) A Risk Assessment Model for Hydrocarbon Refrigerants. In: (Proceedings) Proceedings of the Institute of Refrigeration. (pp. 1 - 14). Institute of Refrigeration

D

de Leeuw, B; Brennan, FP; Roffey, T; (2003) Remote stress monitoring for rail maintenance applications. In: (Proceedings) Proceedings of Railway Engineering. : London.

de Leeuw, B; Brennan, FP; Roffey, T; (2003) Remote stress monitoring of railway infrastructure in the UK. In: (Proceedings) Structural Health Monitoring. : Stanford University.

Diaz-Zuccarini, V; (2003) Etude des conditions d'efficacite du ventricule gauche par optimisation teleonomique d'un modele de son fonctionnement. Doctoral thesis, UNSPECIFIED.

Diaz-Zuccarini, V; LeFevre, J; Delgado M, RA; (2003) A model of the left ventricle: from the mechanisms of contraction to hemodynamics. In: (Proceedings) International Conference on Bond Graph Modelling ICBGM 03.

Dietzel, M; Haferl, S; Ventikos, Y; Poulikakos, D; (2003) Marangoni and variable viscosity phenomena in picoliter size solder droplet deposition. Journal of Heat Transfer , 125 (2) 365 - 376. 10.1115/1.1532014.

Dover, WD; Brennan, FP; Kare, RF; Stacey, A; (2003) Inspection reliability for offshore structures. In: (Proceedings) Proceedings of 22nd International Conference on Offshore Mechanics and Arctic Engineering. ASME: Cancun.

Draper, ERC; Goodship, AE; (2003) A novel technique for four-point bending of small bone samples with semi-automatic analysis. J BIOMECH , 36 (10) 1497 - 1502. 10.1016/S0021-9290(03)00129-5.

E

Eames, I; (2003) The concept of drift and its application to multiphase and multibody problems. PHILOS T R SOC A , 361 (1813) 2951 - 2965. 10.1098/rsta.2003.1277.

Eames, I; Gobby, D; Dalziel, SB; (2003) Fluid displacement by stokes flow past a spherical droplet. J FLUID MECH , 485 67 - 85. 10.1017/S0022112003004361. Green open access
file

Eames, I; Hunt, JCR; (2003) Complex flows through groups of bodies: observations, modelling and general principles. ERCOFTAC Bulletin , 56 (March)

Eames, I; Hunt, JCR; Belcher, SE; (2003) Eulerian and Lagrangian average velocity in and around groups of bodies. In: (Proceedings) ASME/JSME Joint Fluids Engineering Conferance. ASME: Honolulu.

Eames, I; Hunt, JCR; Belcher, SE; (2003) Wake disappearance and mean flow results for multibody and multiphase flows. Proceedings of the ASME/JSME Joint Fluids Engineering Conference , 2 B 1799 - 1804.

Eames, I; Small, I; Cottenden, A; Frampton, A; (2003) Experimental and theoretical study of infiltration in bed pads. Institute of Mechanical Engineers Medical Engineering Series (217) 263 - 271.

Eames, I; Small, I; Frampton, A; Cottenden, AM; (2003) Experimental and theoretical study of the spread of fluid from a point source on an inclined incontinence bed-pad. P I MECH ENG H , 217 (H4) 263 - 271.

Eames, I.; (2003) The concept of drift and its application to multiphase and multibody problems. Philosophical Transactions of The Royal Society A Mathematical Physical and Engineering Sciences , 361 (1813) pp. 2951-2965. 10.1098/rsta.2003.1277.

F

Forbes, A; Cartwright, A; Marchant, S; McIntyre, P; Newton, M; (2003) Review article: oral, modified-release mesalazine formulations- proprietary versus generic. Alimentary Pharmacology and Therapeutics , 17 1207 - 1214.

Freire, PEM; Bucknall, RWG; (2003) Technical and economic feasibility of an unmanned cargo ship powered by electrical propulsion. In: Institute of Marine Engineering, Science and Technology, IMarEST - Conference Proceedings. (pp. 1 - 15).

Fromme, P; Masserey, B; Sayir, MB; (2003) On the detectability of fatigue crack growth at fastener holes using guided waves. In: Thompson, DO and Chimenti, DE, (eds.) REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 22A AND 22B. (pp. 189 - 196). AMER INST PHYSICS

Fromme, P; Wilcox, P; Cawley, P; (2003) Remote monitoring of plate-like structures using guided wave arrays. In: Thompson, DO and Chimenti, DE, (eds.) REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 22A AND 22B. (pp. 157 - 164). AMER INST PHYSICS

Fujii, A; Semenov, YA; Tsujimoto, Y; (2003) Analysis of rotating choke in an inducer. Trans. JSME, Ser. B. , 69-680 764 - 771.

G

Gilbertson, MA; Eames, I; (2003) The influence of particle size on the flow of fluidised powders. POWDER TECHNOL , 131 (2-3) 197 - 205. 10.1016/S0032-5910(02)00343-1.

Gomathi, K; Gopinath, D; Rafiuddin Ahmed, M; Jayakumar, R; (2003) Quercetin incorporated collagen matrices for dermal wound healing processes in rat. Biomaterials , 24 (16) 2767 - 2772. 10.1016/S0142-9612(03)00059-0.

Grafton, T; Greig, AR; Gunner, T; (2003) Fast Norwegian Coastal Modal Shift Freight Ship. In: (Proceedings) Proceedings of the Marine Environmental Engineering Technical Symposium. ASNE and SNAME: Arlington, VA.

Greenslade, M; Hunt, JCR; Mobbs, S; Eames, I; (2003) The distortion of weak fronts by mesoscale orography. FLUID DYN RES , 33 (1-2) 173 - 189. 10.1016/S0169-5983(03)00045-5.

Greig, AR; (2003) Fuel cells and issues for their use in warships. Proceedings of IMarEST Part B: Journal of Marine Design and Operations 9 - 19.

H

Haller, KK; Poulikakos, D; Ventikos, Y; Monkewitz, P; (2003) Shock wave formation in droplet impact on a rigid surface: Lateral liquid motion and multiple wave structure in the contact line region. Journal of Fluid Mechanics (490) 1 - 14. 10.1017/S0022112003005093.

Haller, KK; Ventikos, Y; Poulikakos, D; (2003) Wave structure in the contact line region during high speed droplet impact on a surface: Solution of the Riemann problem for the stiffened gas equation of state. Journal of Applied Physics , 93 (5) 3090 - 3097. 10.1063/1.1543649.

Han, SK; Knight, MK; Brennan, FP; Dover, WD; (2003) Analytical fatigue analysis of drillstring threaded connections. In: (Proceedings) Proceedings of International Society of Offshore and Polar Engineers. ISOPE: Hawaii.

Hanson, B; Levesley, M; Fisher, J; (2003) Using Self-Sensing Techniques to Produce a Small, Robust, Inexpensive Rheometer. Applied Rheology , 13 (5) 242 - 250.

Hassold, GN; Holm, EA; Miodownik, MA; (2003) Accumulation of coincidence site lattice boundaries during grain growth. MATERIALS SCIENCE AND TECHNOLOGY , 19 (6) 683 - 687. 10.1179/026708303225002893.

Hoarau, Y; Braza, M; Ventikos, Y; Faghani, D; Tzabiras, G; (2003) Organized modes and the three-dimensional transition to turbulence in the incompressible flow around a NACA0012 wing. Journal of Fluid Mechanics (496) 63 - 72. 10.1017/S0022112003006530.

Holm, EA; Miodownik, MA; Rollett, AD; (2003) On abnormal subgrain growth and the origin of recrystallization nuclei. ACTA MATERIALIA , 51 (9) 2701 - 2716. 10.1016/S1359-6454(03)00079-X.

Huang, J; Brooks, RA; Best, SM; Bonfield, W; (2003) Evaluation of the biocompatibility of nano-sized carbonate-substituted hydroxyapatite after hydrothermal treatment. BIOCERAMICS 15 , 240-2 485 - 488.

Hunt, JCR; Eames, I; Belcher, SE; (2003) Vorticity Dynamics in the Water Below Steep and Breaking Surface Waves. In: Wind Over Waves II: Forecasting and Fundamentals of Applications. (pp. 140 - 156).

Hunt, JCR; Eames, I; Belcher, SE; (2003) Vortical dynamics beneath large amplitude and breaking waves. In: Sajjadi, SG and Hunt, JCR, (eds.) Wind over Waves II: Forecasting and Fundamentals of Applications. (140 - 156). Horwood Publishing Limited.: Chichester..

Huxtable, J; Stevenson, PR; Dover, WD; Brennan, FP; (2003) Advances in instrumentation to monitor and assess the structural integrity of steel jacket platforms. In: (Proceedings) Proceedings of 22nd International Conference on Offshore Mechanics and Arctic Engineering. ASME: Cancun.

J

Jayasinghe, SN; Edirisinghe, MJ; (2003) A novel process for simulataneous printing of multiple tracks from concentrated suspensions. MATER RES INNOV , 7 (2) 62 - 64. 10.1007/s10019-003-0228-4.

Jayasinghe, SN; Edirisinghe, MJ; (2003) Development of Novel Materials Forming Processes using Electrostatic Atomization. Journal of Aerosol Science , EAC2003 S65 - S66.

Jayasinghe, SN; Edirisinghe, MJ; (2003) Electrostatic atomization of chitosan. J MATER SCI LETT , 22 (20) 1443 - 1445.

Jayasinghe, SN; Edirisinghe, MJ; (2003) Preparation of collagen films by electrostatic atomization. J MATER SCI LETT , 22 (22) 1617 - 1619.

Jiang, X; Luo, KH; (2003) Dynamics and structure of transitional buoyant jet diffusion flames with side-wall effects. Combustion and Flame , 133 (1-2) 29 - 45. 10.1016/S0010-2180(02)00539-4.

K

Knight, MJ; Brennan, FP; Dover, WD; (2003) Controlled failure design of drillstring threaded connections. Fatigue and Fracture of Engineering Materials and Structures , 26 (11) 1081 - 1090.

Konstantinidis, E; Balabani, S; Yianneskis, M; (2003) Relationship between vortex shedding lock-on and heat transfer - Implications for tube bundles in cross-flow. CHEM ENG RES DES , 81 (A6) 695 - 699.

Konstantinidis, E; Balabani, S; Yianneskis, M; (2003) The effect of flow perturbations on the near wake characteristics of a circular cylinder. In: JOURNAL OF FLUIDS AND STRUCTURES. (pp. 367 - 386). ACADEMIC PRESS LTD ELSEVIER SCIENCE LTD

L

Laughton, MA; Warne, DF; Bucknall, RWG; (2003) Electrical engineer's reference book.

Landeryou, M; Eames, I; Frampton, A; Cottenden, A; (2003) Fluid modelling strategies for fibrous sheets. International Journal of Clothing Science and Technology , 16 (1-2) 163 - 172.

Landeryou, MA; Eames, I; Cottenden, A; (2003) Characterisation and modelling of liquid transport in medical absorbent materials. In: Incontinence: the Engineering Challenge. (pp. 1 - 4). Institution of Mechanical Engineers

Lange, A; Harker, A; Saffari, N; (2003) A multilevel multipole method for modeling elastic-wave multiple scattering in fiber-reinforced composites. In: Thompson, DO and Chimenti, DE, (eds.) REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 22A AND 22B. (pp. 85 - 92). AMER INST PHYSICS

Leach, B; Zhao, H; Li, Y; Ma, T; Ladommatos, N; Law, D; Houston, R; (2003) Characterization of in-cylinder fuel distribution from an air-assisted fuel injection system using advanced laser diagnostics. In: FUEL INJECTION SYSTEMS. (pp. 159 - 172). PROFESSIONAL ENGINEERING PUBLISHING LTD

Li, XD; Edirisinghe, MJ; (2003) A new aluminum coordination site in Si-C-Al-N-(O) ceramics. J AM CERAM SOC , 86 (12) 2212 - 2214.

Li, XD; Edirisinghe, MJ; (2003) Structural investigation of Si-Al-C-O precursors and their pyrolysis products in nitrogen. P ROY SOC LOND A MAT , 459 (2039) 2731 - 2747. 10.1098/rspa.2003.1140.

Li, Y; Zhao, H; Leach, B; Ma, T; Ladommatos, N; (2003) Optimisation of in-cylinder flow for fuel stratification in a three-valve twin-spark-plug SI engine. SAE Technical Papers

M

Miodownik, M; (2003) Genetic art. Materials Today , 6 (6) 13 - 13. 10.1016/S1369-7021(03)00614-X. Gold open access

Miodownik, M; (2003) Science iconography. Materials Today , 6 (9) 13 - 13. 10.1016/S1369-7021(03)00916-7. Gold open access

Miodownik, M; (2003) Science labs as art? Materials Today , 6 (4) 13 - 13. 10.1016/S1369-7021(03)00412-7. Gold open access

Miodownik, M; (2003) Space art. Materials Today , 6 (11) 13 - 13. 10.1016/S1369-7021(03)01115-5. Gold open access

Miodownik, M; (2003) The blossoming of sciart. Materials Today , 6 (2) 13 - 13. 10.1016/S1369-7021(03)00214-1. Gold open access

Miodownik, M; (2003) The case for teaching the arts. Materials Today , 6 (12) 36 - 42. 10.1016/S1369-7021(03)01224-0. Gold open access

Miodownik, MA; (2003) Using mechanics to map genotype to phenotype. On Growth, Form and Computers 203 - 219. 10.1016/B978-012428765-5/50044-X.

N

Ngiam, SS; Brennan, FP; (2003) Experimental investigation of crack shape evolution in cold rolled components. In: (Proceedings) International Conference on Fatigue Crack Paths. : Parma.

P

Palmer, RM; Newton, JM; Basit, AW; Bloor, JR; (2003) Colonic release composition. World-wide 2003/030068 196.

Peng, Z; Zhao, H; Ladommatos, N; (2003) Effects of air/fuel ratios and EGR rates on HCCI combustion of N-heptane, a diesel type fuel. SAE Technical Papers

Peng, Z; Zhao, H; Ladommatos, N; (2003) Visualization of the homogeneous charge compression ignition/controlled autoignition combustion process using two-dimensional planar laser-induced fluorescence imaging of formaldehyde. P I MECH ENG D-J AUT , 217 (D12) 1125 - 1134.

Pichardo, C; Delgado, M; (2003) Pseudo-bond graph model and simulation of an industrial flash separator. Simulation Modelling Practice and Theory , 11 , Article 2. 10.1016/S1569-190X(03)00011-X.

Podczeck, F; Newton, JM; (2003) The implications of the determination of the mechanical strength of powder compacts containing a pre-formed hole. POWDER TECHNOL , 132 (1) 10 - 15. 10.1016/S0032-5910(02)00336-4.

Podczeck, F; Wood, AV; (2003) The relationship between granule growth mechanism, amount of liquid binder added and properties of the wet powder mass determined using a split bed shear tester. INT J PHARM , 257 (1-2) 57 - 67. 10.1016/S0378-5173(03)00130-3.

R

Rajapaksha, L; Suen, KO; (2003) Influence of reversing methods on the performance of a reversible water-to-water heat pump. APPL THERM ENG , 23 (1) 49 - 64.

Rodriguez-Sanchez, E; Dover, WD; Brennan, FP; (2003) Design of crack removal profiles based on shape development of surface defects. In: (Proceedings) Proceedings of 22nd International Conference on Offshore Mechanics and Arctic Engineering. ASME: Cancun.

S

Scarpa, F; Smith, FC; Chambers, B; Burriesci, G; (2003) Mechanical and electromagnetic behaviour of auxetic honeycomb structures. AERONAUT J , 107 (1069) 175 - 183.

Schleer, M; Hong, SS; Abhari, RS; Zangeneh, M; Roduner, C; Ribi, B; Pløger, F; (2003) Investigation of an inversely designed centrifugal compressor stage - Part 2: Experimental investigations. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI , 6 B 669 - 680. 10.1115/GT2003-38127.

Schleer, M; Hong, SS; Zangeneh, M; Roduner, C; Ribi, B; Ploger, F; Abhari, R; (2003) Investigation of an inversely designed centrifugal compressor stage part 2: experimental investigations. In: (Proceedings) ASME TURBO EXPO. (pp. 1 - 12). ASME: Atlanta.

Semenov, Y; Tsujimoto, Y; (2003) A cavity wake model based on the viscous/inviscid interaction approach and its application to nonsymmetric cavity flows in inducers. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , 125 (5) 758 - 766. 10.1115/1.1598990.

Smith, F.T.; Li, L.; Wu, G.X.; (2003) Air cushioning with a lubrication/ inviscid balance. Journal of Fluid Mechanics , 482 pp. 291-318. 10.1017/S0022112003004063. Green open access
file

Stride, E; (2003) Characterisation and design of microbubble ultrasound contrast agents. In: (Proceedings) Contrast Media Research Symposium, 29th October-1st November, San Diego, USA.

Stride, E; Saffari, N; (2003) Investigating the potential for thermal damage posed by microbubble ultrasound contrast agents. In: (Proceedings) Ultrasonics International, 1st-3rd July, Granada, Spain.

Stride, E; Saffari, N; (2003) Microbubble ultrasound contrast agents: a review. P I MECH ENG H , 217 (H6) 429 - 447.

Stride, E; Saffari, N; (2003) On the destruction of microbubble ultrasound contrast agents. ULTRASOUND MED BIOL , 29 (4) 563 - 573. 10.1016/S0301-5629(02)00787-1.

T

Talei-Faz, B; Brennan, FP; Dover, WD; (2003) Residual static strength of high strength steel cracked tubular joints. In: (Proceedings) Ninth International Conference on the Jack-up Platform. : London.

Talei-Faz, B; Brennan, FP; Robson, S; (2003) Deformation measurements of full-scale fracture tests of pre-cracked tubular joints. In: (Proceedings) OMAE03 (22nd International Conference on Offshore Mechanics and Arctic Engineering).

Talei-Faz, B; Brennan, FP; Robson, S; (2003) Deformation measurements on full-scale fracture tests of pre-cracked tubular joints. In: Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE. (pp. 3 - 9).

Tay, BY; Evans, JRG; Edirisinghe, MJ; (2003) Solid freeform fabrication of ceramics. INT MATER REV , 48 (6) 341 - 370. 10.1179/095066003225010263.

W

Watanabe, H; Zangeneh, M; (2003) Design of the blade geometry of swept transonic fans by 3D inverse design. In: American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI. (pp. 603 - 612).

Wojcik, A; Middleton, H; Damopoulos, I; Van herle, J; (2003) Ammonia as a fuel in solid oxide fuel cells. JOURNAL OF POWER SOURCES , 118 (1-2) 342 - 348. 10.1016/S0378-7753(03)00083-1.

Wojcik, A; Wojcik, LE; (2003) Modelling the SEM-REBIC charge collection contrast in ZnO varistors. In: Institute of Physics Conference Series. (pp. 589 - 592). IOP: London.

Wu, GX; Eatock Taylor, R; (2003) The coupled finite element and boundary element analysis of nonlinear interactions between waves and bodies. Ocean Engineering , 30 (3) 387 - 400.

Wu, GX; Taylor, RE; (2003) The coupled finite element and boundary element analysis of nonlinear interactions between waves and bodies. In: Ocean Engineering. (pp. 387 - 400).

Z

Zangeneh, M; Goto, A; (2003) mixed flow pump. DK 1073847 (T3).

Zangeneh, M; goto, A; (2003) Turbomachinery Impeller. US 6508626 (B1).

Zangeneh, M; Schleer, M; Hong, SS; Abhari, RS; Roduner, C; Ribi, B; Pløger, F; (2003) Investigation of an inversely designed centrifugal compressor stage part 1: Design and numerical verification. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI , 6 B 777 - 787. 10.1115/GT2003-38531.

Zangeneh, M; Schleer, M; Ploger, F; Hong, SS; Roduner, C; Ribi, B; Abhari, R; (2003) Investigation of an inversely designed centrifugal compressor stage part 1: Design and numerical verification. In: (Proceedings) ASME TURBO EXPO. (pp. 1 - 9). ASME: Atlanta.

Zhao, X; Evans, JRG; Edirisinghe, MJ; Song, JH; (2003) Formulation of a ceramic ink for a wide-array drop-on-demand ink-jet printer. CERAM INT , 29 (8) 887 - 892. 10.1016/S0272-8842(03)00032-4.

Zhu, Y; Zhao, H; Ladommatos, N; (2003) Computational study of the effects of injection timing, egr and swirl ratio on a HSDI multi-injection diesel engine emission and performance. In: SAE Technical Papers.

Zou, Z; Tan, PJ; Li, S; Harrigan, JJ; Reid, SR; (2003) Effects of non-periodic microstructure and imperfections on the dynamic response of two-dimensional cellular materials. In: (Proceedings) Mechanics and Materials Conference, 17th - 21st June. : Scottsdale, Arizona.

This list was generated on Sun Aug 24 13:43:10 2014 BST.