UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

Browse by UCL Departments and Centres

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Author | Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | Z
Number of items: 143.

A

Ahmed, SF and Balachandran, R and Marchione, T and Mastorakos, E (2007) Spark ignition of turbulent nonpremixed bluff-body flames. COMBUST FLAME , 151 (1-2) 366 - 385. 10.1016/j.combustflame.2007.06.012.

Ahmed, SF and Balachandran, R and Mastorakos, E (2007) Measurements of ignition probability in turbulent non-premixed counterflow flames. Proceedings of the Combustion Institute , 31 1507 - 1513.

Ahmed, SF and Balachandran, R and Mastorakos, E (2007) Measurements of ignition probability in turbulent non-premixed counterflow flames. In: P COMBUST INST. (pp. 1507 - 1513). ELSEVIER SCIENCE INC

Aleiferis, PG and Charalambides, AG and Hardalupas, Y and Taylor, AMKP and Urata, Y (2007) Axial fuel stratification of a homogeneous charge compression ignition (HCCI) engine. INTERNATIONAL JOURNAL OF VEHICLE DESIGN , 44 (1-2) 41 - 61. 10.1504/IJVD.2007.013218.

Aleiferis, PG and Hardalupas, Y and Kolokotronis, D and Taylor, AMKP and Kimura, T (2007) Investigation of the Internal Flow Field of a Diesel Model Injector Using Particle Image Velocimetry and CFD. In: SAE Paper 2007-01-1897.

Aleiferis, PG and Serras-Pereira, J and van Romunde, Z and Richardson, D and Wallace, S and Cracknell, RF and Walmsley, HL (2007) Optical Studies of Spray Development in a Quiescent Chamber and in a Direct-Injection Spark-Ignition Engine. In: (Proceedings) Internal Combustion Engines: Performance, Fuel Economy and Emissions. (pp. 3 - 13). : IMechE, London.

Alp, B and Blunn, GW and Hanson, B and Brown, RA (2007) Automated rapid tissue fabrication device: Prototype and proof of principle. In: TISSUE ENGINEERING. (pp. 1641 - 1642). MARY ANN LIEBERT INC

Andrews, DJ and Casarosa, L and Pawling, R and Galea, E and Deere, S and Lawrence, S (2007) Integrating personnel movement simulation into preliminary ship design. In: (Proceedings) Human factors IV conference, RINA. : London.

Andrews, DJ and Pawling, R (2007) Design of a joint support ship. In: (Proceedings) International Conference 'Warship 2007', RINA. : Bath, England.

Andrews, DJ and Pawling, R (2007) Research into the use of computer aided graphics in preliminary ship design. In: Proceedings of ICCAS 2007. : Portsmouth.

Arumuganathar, S and Irvine, S and McEwan, JR and Jayasinghe, SN (2007) Aerodynamically assisted bio-jets: the development of a novel and direct non-electric field-driven methodology for engineering living organisms. BIOMED MATER , 2 (2) 158 - 168. 10.1088/1748-6041/2/2/015.

Arumuganathar, S and Irvine, S and McEwan, JR and Jayasinghe, SN (2007) Pressure-assisted cell spinning: a direct protocol for spinning biologically viable cell-bearing fibres and scaffolds. BIOMED MATER , 2 (4) 211 - 219. 10.1088/1748-6041/2/4/002.

Arumuganathar, S and Jayasinghe, SN (2007) A novel direct fibre generation technique for preparing functionalized and compound scaffolds and membranes for applications within the life sciences. BIOMED MATER , 2 (3) 189 - 195. 10.1088/1748-6041/2/3/004.

Arumuganathar, S and Jayasinghe, SN (2007) Pressure-assisted spinning: A unique and versatile approach for directly fabricating membranes with micro- and nanofibers. NANO , 2 (4) 213 - 219.

Arumuganathar, S and Jayasinghe, SN (2007) Pressure-assisted spinning: A versatile and economical, direct fibre to scaffold spinning methodology. MACROMOL RAPID COMM , 28 (14) 1491 - 1496. 10.1002/marc.200700153.

Arumuganathar, S and Jayasinghe, SN and Suter, N (2007) Aerodynamically assisted jet processing of viscous single- and multi-phase media. SOFT MATTER , 3 (5) 605 - 612. 10.1039/b610554h.

Arumuganathar, S and Jayasinghe, SN and Suter, N (2007) Aerodynamically assisted jetting: a rapidly emerging microfabrication methodology. MICRO NANO LETT , 2 (4) 78 - 84. 10.1049/mnl:20070038.

Arumuganathar, S and Jayasinghe, SN and Suter, N (2007) Unique aerodynamically driven methodology for forming droplets, threads to scaffolds. J APPL POLYM SCI , 104 (6) 3844 - 3848. 10.1002/app.25975.

Arumuganathar, S and Jayasinghe, SN and Suter, N (2007) Versatile methodology for generating size-controlled composite micrometer beads capsulating nanomaterials. MICRO NANO LETT , 2 (2) 30 - 34. 10.1049/mnl:20070020.

Ashayer, R and Mannan, SH and Sajjadi, S and Clode, MP and Miodownik, MM (2007) Nanoparticle enhanced solders for high temperature environments. Proceedings of the Electronic Packaging Technology Conference, EPTC 109 - 113.

B

Bucknall, RWG (2007) On the modelling of harmonics in marine electrical propulsion systems. In: IMarEST AES 2007.

Bucknall, RWG and McClusky, J (2007) The Hydrogen Economy and its Implications for Transport in the future and current advances and projects utilising hydrogen technology in advanced power systems. In: Proc 14th World Congress on ITS.

Bucknall, RWG (2007) On the modelling of harmonics in marine electrical propulsion systems. Proceedings of the Institute of Marine Engineering, Science and Technology. , Part D (1) ? - ?.

Bonaiuti, D and Zangeneh, M and Li, YS and Pitigala, A (2007) Redesign of a transonic compressor rotor by means of a three-dimensional inverse design method: A parametric study. In: Proceedings of the ASME Turbo Expo 2007, Vol 6, Pts A and B. (pp. 173 - 187). AMER SOC MECHANICAL ENGINEERS

Burriesci, G (2007) Endovascular Aortic Valve Replacement (Invited Talk). In: (Proceedings) 5th European Symposium of Vascular Biomaterials.

Burriesci, G and Bergamasco, G (2007) Annuloplasty prosthesis with an auxetic structure. US2007162112 (A1).

Burriesci, G and Bergamasco, G (2007) Annuloplasty prosthesis with an auxetic structure. US2007162112 A1.

C

Carter, R and Giles, MB (2007) Sharp Error Estimates for Discretizations of the 1D Convection/Diffusion Equation with Dirac Initial Data. IMA Journal of Numerical Analysis , 27 (2) 406 - 425.

Carter, R and Newton, M (2007) A timely delivery. Materials World , 15 (8) 22 - 24.

Chien, C.H. and Bucknall, R.W.G. (2007) Analysis of harmonics in subsea power transmission cables used in VSC-HVDC transmission systems operating under steady-state conditions. IEEE Transactions on Power Delivery , 22 (4) pp. 2489-2497. 10.1109/TPWRD.2007.905277.
An open access version is available from UCL Discovery
 file

Chien, CH and Bucknall, RWG (2007) Analysis of harmonics in subsea power transmission cables used in VSC-HVDC transmission systems operating under steady-state conditions. IEEE T POWER DELIVER , 22 (4) 2489 - 2497. 10.1109/TPWRD.2007.905277.

Cooper, SL and Burger, DPG and McDonald, TP (2007) Concepts for a Fleet Tanker: An Exploration into Options and Pricing. In: (Proceedings) RINA Support Ships Conference.

Cooper, SL and Burger, DPG and McDonald, TP (2007) Concepts for a fleet tanker: An exploration into options and pricing. RINA, Royal Institution of Naval Architects International Conference - Military Support Ships - Papers 59 - 66.

D

Davies, PN and Worthington, HEC and Podczeck, F and Newton, JM (2007) The determination of the mechanical strength of tablets of different shapes. EUR J PHARM BIOPHARM , 67 (1) 268 - 276. 10.1016/j.ejpb.2007.01.014.

Díaz-Zuccarini, V and LeFèvre, J (2007) An energetically coherent lumped parameter model of the left ventricle specially developed for educational purposes. Comp. in Bio. and Med. , 37 , Article 6. 10.1016/j.compbiomed.2006.07.002.

Díaz-Zuccarini, V and Rafirou, D and Hose, DR and Lawford, PV and Narracott, AJ (2007) Multi-physics and Multi-scale Modelling in Cardiovascular Physiology: Advanced User Methods for Simulation of Biological Systems with ANSYS/CFX. International Conference on Computational Science (1) , 4487 794 - 801. 10.1007/978-3-540-72584-8_105.

Drake, KR and Newton, JM and Mokhtary-Sayhafi, S and Davies, PN (2007) Tensile stresses generated in pharmaceutical tablets by opposing compressive line loads. EUR J PHARM SCI , 30 (3-4) 273 - 279. 10.1016/j.ejps.2006.11.011.

Ducci, A and Yianneskis, M (2007) Vortex identification methodology for feed insertion guidance in fluid mixing processes. In: CHEMICAL ENGINEERING RESEARCH & DESIGN. (pp. 543 - 550). INST CHEMICAL ENGINEERS

Ducci, A and Yianneskis, M (2007) Vortex tracking and mixing enhancement in stirred processes. AICHE J , 53 (2) 305 - 315. 10.1002/aic.11076.

E

Eames, I and Landeryou, M and Flor, JB (2007) Inviscid coupling between point symmetric bodies and singular distributions of vorticity. J FLUID MECH , 589 33 - 56. 10.1017/S0022112007007161.
An open access version is available from UCL Discovery
 file

Edirisinghe, M and Stride, E and Moaleji, R and Pancholi, K and Farook, U (2007) System and Method for Microbubble Production: UK Patent Application 0706175.7, 2007 & Int. Patent Application PCT/GB2008/001050 of 28th March 2008.

F

Farook, U and Pancholi, K and Moaleji, R and Stride, E and Edirisinghe, M (2007) Novel Methods for Microbubble Preparation. In: (Proceedings) IEEE International Ultrasonics Symposium, 27th October-1st November, New York City, USA.

Farook, U and Stride, E and Edirisinghe, M and Moaleji, R (2007) Development of a Novel Technique for the Preparation of Microbubble Suspensions for Ultrasound Imaging and Drug Delivery. In: (Proceedings) Annual Scientific Meeting of the Institute of Physics and Engineering in Medicine, 29th March, Portsmouth, UK.

Farook, U and Stride, E and Edirisinghe, MJ and Moaleji, R (2007) Microbubbling by co-axial electrohydrodynamic atomization. MED BIOL ENG COMPUT , 45 (8) 781 - 789. 10.1007/s11517-007-0210-1.

Farook, U and Zhang, HB and Edirisinghe, MJ and Stride, E and Saffari, N (2007) Preparation of microbubble suspensions by co-axial electrohydrodynamic atomization. MED ENG PHYS , 29 (7) 749 - 754. 10.1016/j.medengphy.2006.08.009.

Franchetta, M and Suen, KO and Bancroft, TG (2007) Pseudo-transient CFD analysis of underbonnet compartment during thermal soak. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering , 221 (10) 1209 - 1220. 10.1243/09544070JAUTO555.

Franchetta, M. and Suen, K.O. and Bancroft, T.G. (2007) Pseudo-transient computational fluid dynamics analysis of an underbonnet compartment during thermal soak. Proceedings of the Institution of Mechanical Engineers. Part D. Journal of Automobile Engineering , 221 (10) pp. 1209-1220. 10.1243/09544070JAUTO555.
An open access version is available from UCL Discovery
 file

Fromme, P (2007) Experimental and finite element study of guided ultrasonic wave scattering at structural features in a plate. In: Thompson, DO and Chimenti, DE, (eds.) Review of Progress in Quantitative Nondestructive Evaluation, Vols 26A and 26B. (pp. 55 - 62). AMER INST PHYSICS

Fu, X and Huang, J and Thian, ES and Best, SM and Bonfield, W (2007) Three-dimensional characterization of the microstructure of bioglass/polyethylene composite by x-ray microtomography. Bioceramics, Vol 19, Pts 1 and 2 , 330-332 503 - 506.

G

Goman, OG and Semenov, YA (2007) Oblique entry of a wedge into an ideal incompressible fluid. Fluid Dynamics , 42 (4) 581 - 590.

Gupta, A and Seifalian, AM and Ahmad, Z and Edirisinghe, MJ and Winslet, MC (2007) Novel electrohydrodynamic printing of nanocomposite biopolymer scaffolds. J BIOACT COMPAT POL , 22 (3) 265 - 280. 10.1177/0883911507078268.

H

Hanson, BM and Levesley, MC and Watterson, K and Walker, PG (2007) Hardware-in-the-loop-simulation of the cardiovascular system, with assist device testing application. MED ENG PHYS , 29 (3) 367 - 374. 10.1016/j.medengphy.2006.05.010.

Hibbs, K and Mari, JM and Stride, E and Eckersley, RJ and Noble, A and Tang, M-X (2007) Nonlinear propagation of ultrasound through microbubble clouds: A novel numerical implementation. In: Proceedings - IEEE Ultrasonics Symposium. (pp. 1997 - 2000).

Hibbs, K and Mari, JM and Stride, E and Eckersley, RJ and Noble, A and Tang, MX (2007) Nonlinear propagation of ultrasound through microbubble clouds: A novel numerical implementation. 2007 IEEE ULTRASONICS SYMPOSIUM PROCEEDINGS, VOLS 1-6 1997 - 2000.

Huang, J and Best, SM (2007) Ceramic biomaterials. In: Boccaccini, ARAG and J, E, (eds.) Tissue Engineering Using Ceramics and Polymers. (3 - 31). Woodhead Publishing Ltd: Cambridge,.

Huang, J and Lin, YW and Fu, XW and Best, SM and Brooks, RA and Rushton, N and Bonfield, W (2007) Development of nano-sized hydroxyapatite reinforced composites for tissue engineering scaffolds. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE , 18 (11) 2151 - 2157. 10.1007/s10856-007-3201-8.

Hunt, JCR and Delfos, R and Eames, I and Perkins, RJ (2007) Vortices, complex flows and inertial particles. FLOW TURBUL COMBUST , 79 (3) 207 - 234. 10.1007/s10494-007-9096-0.

I

Irvine, S and Arumuganathar, S and McEwan, JR and Jayasinghe, SN (2007) Coaxial aerodynamically assisted bio-jets: A versatile paradigm for directly engineering living primary organisms. ENG LIFE SCI , 7 (6) 599 - 610. 10.1002/e1sc.200720219.

J

J H Page, W and G X, FTS (2007) Effects of local configuration on the flow in the circle of Willis. In: (Proceedings) the Fifth International Conference on Fluid Dynamics. Tsinghua University Press & Springer

Janssens, KGF and Miodownik, M and Raabe, D and Nestler, B and Kosezchnik, E (2007) Computational materials engineering. Academic Press

Jayasinghe, SN (2007) Bio-electrosprays: the development of a promising tool for regenerative and therapeutic medicine. Biotechnol J , 2 (8) 934 - 937. 10.1002/biot.200700063.

Jayasinghe, SN (2007) Direct cell engineering reaches the jet age. MATER TODAY , 10 (6) 60 - 60.
An open access publication

Jayasinghe, SN (2007) Submerged electrosprays: A versatile approach for microencapsulation. J MICROENCAPSUL , 24 (5) 430 - 444. 10.1080/02652040701369590.

Jayasinghe, SN and Irvine, S and McEwan, JR (2007) Cell electrospinning highly concentrated cellular suspensions containing primary living organisms into cell-bearing threads and scaffolds. NANOMEDICINE-UK , 2 (4) 555 - 567. 10.2217/17435889.2.4.555.

Jones, PH and Marago, OM and Stride, EPJ (2007) Parametrization of trapping forces on microbubbles in scanning optical tweezers. J OPT A-PURE APPL OP , 9 (8) S278 - S283. 10.1088/1464-4258/9/8/S23.

K

Keeling, DG and Levesley, MC and Walker, PG and Hanson, BM and Watterson, K and Pereni, CI and Jaber, O (2007) The circumferential loading of a direct cardiac compression assist device. In: Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings. (pp. 1031 - 1034).

Khabakhpasheva, TI and Wu, GX (2007) Coupled compressible and incompressible approach for jet impact onto elastic plate. In: (Proceedings) 22nd Int. workshop on water waves and floating bodies.

Kidane, AG and Edirisinghe, MJ and Bonhoeffer, P and Seifalian, AM (2007) Flow behaviour of a POSS biopolymer solution. BIORHEOLOGY , 44 (4) 265 - 272.

Konstantinidis, E and Balabani, S (2007) Symmetric vortex. shedding in the near wake of a circular cylinder due to streamwise perturbations. J FLUID STRUCT , 23 (7) 1047 - 1063. 10.1016/j.jfluidstructs.2007.03.002.

Konstantinidis, E and Balabani, S (2007) Symmetric vortex shedding from a circular cylinder under periodic flow forcing. In: Paidoussis, MP, (ed.) PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE VOL 9. (pp. 179 - 185). AMER SOC MECHANICAL ENGINEERS

Konstantinidis, E and Balabani, S and Yianneskis, M (2007) Bimodal vortex shedding in a perturbed cylinder wake. PHYS FLUIDS , 19 (1) , Article 011701. 10.1063/1.2432152.

L

Li, X and Huang, J and Ahmad, Z and Edirisinghe, M (2007) Electrohydrodynamic coating of metal with nano-sized hydroxyapatite. BIO-MED MATER ENG , 17 (6) 335 - 346.

Li, X and Huang, J and Ahmad, Z and Edirisinghe, M (2007) Electrohydrodynamic coating of metal with nano-sized hydroxyapatite. Biomed Mater Eng , 17 (6) 335 - 346.

M

Mahalingam, S and Edirisinghe, MJ (2007) Characteristics of electrohydrodynamically prepared titanium dioxide films. APPL PHYS A-MATER , 89 (4) 987 - 993. 10.1007/s00339-007-4232-1.

Mak, H and Balabani, S (2007) Near field characteristics of swirling flow past a sudden expansion. CHEM ENG SCI , 62 (23) 6726 - 6746. 10.1016/j.ces.2007.07.009.

Malcolm, JS and Aleiferis, PG and Todd, AR and Cairns, A and Hume, A and Blaxill, H and Hoffmann, H and Rueckauf, J (2007) A Study of Alcohol Blended Fuels in a New Optical Spark-Ignition Engine. In: (Proceedings) Internal Combustion Engines: Performance, Fuel Economy and Emissions. (pp. 223 - 234). : IMechE, London.

Marchione, T and Ahmed, SF and Balachandran, R and Mastorakos, E (2007) Effectiveness of localised spark ignition in recirculating n-heptane spray flames. In: (Proceedings) 21st International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS). : Poitiers.

McDonald, T and Aston, J and Rusling, S (2007) Cheviot Development – Hybrid Gravity Substructure Stability Analysis.

Miodownik, M (2007) An unspeakable love of gold. MATERIALS TODAY , 10 (11) 6 - 6. 10.1016/S1369-7021(06)71773-4.
An open access publication

Miodownik, M (2007) Is modern art sh!t? MATERIALS TODAY , 10 (6) 6 - 6. 10.1016/S1369-7021(06)71773-4.
An open access publication

Miodownik, M (2007) The bionic future of sport. Materials Today , 10 (9) 6 - 6.
An open access publication

Miodownik, M (2007) The bionic future of sport - From tennis rackets to carbon fiber prosthetics, materials science has an important role to play in sport. MATERIALS TODAY , 10 (9) 6 - 6. 10.1016/S1369-7021(06)71773-4.
An open access publication

Miodownik, M (2007) The materials science of pleasure. Materials Today , 10 (4) 6 - 6.
An open access publication

Miodownik, M (2007) The materials science of pleasure - Understanding the behavior of chocolate is a materials science problem and, as usual, the key is the structure-property relationship. MATERIALS TODAY , 10 (4) 6 - 6. 10.1016/S1369-7021(06)71773-4.
An open access publication

Miodownik, M (2007) Waxing lyrical. MATERIALS TODAY , 10 (1-2) 6 - 6. 10.1016/S1369-7021(06)71773-4.
An open access publication

Miodownik, MA (2007) Toward designing new sensoaesthetic materials. PURE AND APPLIED CHEMISTRY , 79 (10) 1635 - 1641. 10.1351/pac200779101635.

Moaleji, R and Greig, AR (2007) On the development of ship anti-roll tanks. OCEAN ENG , 34 (1) 103 - 121. 10.1016/j.oceaneng.2005.12.013.

Muñoz, JJ and Barrett, K and Miodownik, M (2007) A deformation gradient decomposition method for the analysis of the mechanics of morphogenesis. J Biomech , 40 (6) 1372 - 1380. 10.1016/j.jbiomech.2006.05.006.

N

Nazhat, SN and Abou Neel, EA and Kidane, A and Ahmed, I and Hope, C and Kershaw, M and Lee, PD and Stride, E and Saffari, N and Knowles, JC and Brown, RA (2007) Controlled microchannelling in dense collagen scaffolds by soluble phosphate glass fibers. BIOMACROMOLECULES , 8 (2) 543 - 551. 10.1021/bm060715f.

Newton, JM and Pinto, MR and Podczeck, F (2007) The preparation of pellets containing a surfactant or a mixture of mono- and di-gylcerides by extrusion/spheronization. EUR J PHARM SCI , 30 (3-4) 333 - 342. 10.1016/j.ejps.2006.11.020.

Niazi, A and Dai, JS and Balabani, S and Seneviratne, L (2007) A new overhead estimation methodology: a case study in an electrical engineering company. P I MECH ENG B-J ENG , 221 (4) 699 - 710. 10.1243/09544054JEM681.

Nicklasson, H and Podczeck, F (2007) Evaluation of the role of pores during strength testing in compacts made from different particle size fractions of sucrose. CHEM PHARM BULL , 55 (1) 29 - 33.

O

Odenwälder, PK and Irvine, S and McEwan, JR and Jayasinghe, SN (2007) Bio-electrosprays: a novel electrified jetting methodology for the safe handling and deployment of primary living organisms. Biotechnol J , 2 (5) 622 - 630. 10.1002/biot.200700031.

P

Pancholi, K and Edirisinghe, M (2007) UNSPECIFIED In: (Proceedings) Microbubbling Viscous Liquids and Suspensions, APS March Meeting.

Patel, R and Ladommatos, N (2007) Pumping work reduction afforded by full variable valve trains - a focus on intake valve timing strategies. In: (Proceedings) International congress on engine combustion processes, current problems and modern techniques, VIII Congress. : LTT Erlangen / Munich.

Pinakpani, PE (2007) Advances in Pattern Recognition: Proceedings of the Sixth International Conference on Advances in Pattern Recognition (ICARP 2007). In: UNSPECIFIED (208 - 214). World Scientific Publishing Co Pte Ltd: Singapore.

Podczeck, F (2007) Investigations into the mechanical strength anisotropy of Sorbitol Instant compacts made by uniaxial compression. ADV POWDER TECHNOL , 18 (4) 361 - 379. 10.1163/156855207781389465.

PODCZECK, F (2007) Rheology of pharmaceutical systems. In: Encyclopedia of pharmaceutical technology. (3128 - 3146). Informa Healthcare USA: New York.

Podczeck, F and Course, N and Newton, JM and Short, MB (2007) Gastrointestinal transit of model mini-tablet controlled release oral dosage forms in fasted human volunteers. J PHARM PHARMACOL , 59 (7) 941 - 945. 10.1211/jpp.59.7.0005.

Podczeck, F and Course, NC and Newton, JM and Short, MB (2007) The influence of non-disintegrating tablet dimensions and density on their gastric emptying in fasted volunteers. J PHARM PHARMACOL , 59 (1) 23 - 27. 10.1211/jpp.59.1.0004.

Podczeck, F and Mitchell, CL and Newton, JM and Evans, D and Short, MB (2007) The gastric emptying of food as measured by gamma-scintigraphy and electrical impedance tomography (EIT) and its influence on the gastric emptying of tablets of different dimensions. J PHARM PHARMACOL , 59 (11) 1527 - 1536. 10.1211/jpp.59.11.0010.

Q

Q, S and Wu, GX and Ovendon, N (2007) Numercial Simulations of Blood Flow through a Permeable Curved Vessel in a Solid Tumour. In: (Proceedings) The Fifth International Conference on Fluid Dynamics. (pp. 618 - 621). Tsinghua University Press & Springer

R

Rocks, SA and Wang, D and Sun, D and Jayasinghe, SN and Edirisinghe, MJ and Dorey, RA (2007) Direct writing of lead zirconate titanate piezoelectric structures by electrohydrodynamic atomisation. JOURNAL OF ELECTROCERAMICS , 19 (4) 287 - 293. 10.1007/s10832-007-9029-2.

S

Saffari, N and Livshics, A and Harker, AH (2007) Modelling for Ultrasonic Inspection of Aerospace Composites. In: (Proceedings) 1st International Conference on Technical Inspection and NDT.

Schonborn, A and Ladommatos, N and Williams, J and Allan, R and Rogerson, J (2007) Effects on diesel combustion of the molecular structure of potential synthetic bio-fuel molecules. In: (Proceedings) 8th International conference on engines and automobiles. SAE: Capri.

Seifalian, A and Kannan, R and Sarkar, S and Burriesci, G and Darbishire, A and Mirzay-Razaz, J and Hamilton, G (2007) Polyhedral oligomeric silsesquioxane (POSS) nanocomposite for development of cardiovascular devices. In: (Proceedings) 21st European Conference on Biomaterials.

Serras-Pereira, J and Aleiferis, PG and Richardson, D and Wallace, S (2007) Mixture Formation and Combustion Variability in a Spray-Guided DISI Engine. SAE Transactions, Journal of Engines , 116 (3) , Article 2007-01-4033. 10.4271/2007-01-4033.

Serras-Pereira, J and Aleiferis, PG and Richardson, D and Wallace, S (2007) Spray Development, Flow Interactions and Wall Impingement in a Direct-Injection Spark-Ignition Engine. SAE Technical Papers , Article 2007-01-2712. 10.4271/2007-01-2712.

Serratoni, M and Newton, M and Booth, S and Clarke, A (2007) Controlled drug release from pellets containing water-insoluble drugs dissolved in a self-emulsifying system. Eur J Pharm Biopharm , 65 (1) 94 - 98. 10.1016/j.ejpb.2006.07.011.

Sison, K and Ladommatos, N and Song, HW and Zhao, H (2007) Soot generation of diesel fuels with substantial amounts of oxygen-bearing compounds added. FUEL , 86 (3) 345 - 352. 10.1016/j.fuel.2006.07.019.

Smith, TWP and Drake, KR and Rusling, S (2007) Investigation of the variation of loads experienced by a damaged ship in waves. In: (Proceedings) Advancements in Marine Structures. Proceedings of MarStruct 2007, 1st international Conference on Marine Structures, Glasgow, 12-14 March. (pp. 89 - 98).

Stansfield, P and Wigley, G and Garner, CP and Patel, R and Ladommatos, N and Pitcher, G and Turner, JWG and Nuglisch, H and Heilie, J (2007) Unthrottled engine operation using variable valve activation: the impact on the flow field, mixing and combustion. SAE Transactions Paper 2007-01-1414 (2007-01-1414)

Stolkin, R and Hodgetts, M and Greig, A and Gilby, J (2007) Extended Markov Random Fields for predictive image segmentation. In: (Proceedings) 6th Intl Conf on Advances in Pattern Recognition ICAPR. (pp. 208 - 214). World Scientific Publishing Co. Pte. Ltd.: Singapore.

Stride, E and Chetty, K and Eckersley, R (2007) Dynamic interactions between contrast agent microbubbles: High speed camera observations and simulation results. In: Coussios, CC and TerHaar, G, (eds.) 6th International Symposium on Therapeutic Ultrasound. (pp. 205 - 211). AMER INST PHYSICS

Stride, E and Chetty, K and Sennoga, C and Hajnal, J and Eckersley, R (2007) Engineering the Acoustic Response of Coated Microbubbles. Anglo-French Physical Acoustics Conference. In: (Proceedings) 6th Anglo-French Physical Acoustics Conference, 17th-19th January, Frejus, France.

Stride, E and Eckersley, R and Chetty, K and Sennoga, C (2007) Engineering Microbubble Agents for Enhanced Detectability in Therapeutic Applications. In: (Proceedings) 19th International Congress on Acoustics, 4th-7th September, Madrid, Spain.

Sullivan, AC and Jayasinghe, SN (2007) Development of a direct three-dimensional biomicrofabrication concept based on electrospraying a custom made siloxane sol. BIOMICROFLUIDICS , 1 (3) , Article 034103. 10.1063/1.2766761.

Sullivan, AC and Scott, K and Jayasinghe, SN (2007) Nanofabrication by electrohydrodynamic jetting of a tailor-made living siloxane sol. MACROMOL CHEM PHYS , 208 (18) 2032 - 2038. 10.1002/macp.200700279.

Sun, N and Torii, R and Wood, NB and Wright, A and Hughes, AD and Thom, SAM and Xu, XY (2007) Numerical simulation of blood-wall albumin transport in a realistic human right coronary artery. Proceedings of the ASME Summer Bioengineering Conference 2007, SBC 2007 107 - 108.

T

Thian, ES and Ahmad, Z and Huang, J and Edirisinghe, MJ and Jayasinghe, SN and Ireland, DC and Brooks, RA and Rushton, N and Bonfield, W and Best, SM (2007) Bioactivity of nanoapatite produced by electrohydrodynamic atomisation. Journal of Bionanoscience , 1 60 - 63.

Thian, ES and Huang, J and Best, SM and Barber, ZH and Bonfield, W (2007) Silicon-substituted hydroxyapatite: The next generation of bioactive coatings. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS , 27 (2) 251 - 256. 10.1016/j.msec.2006.05.016.

Thian, ES and Huang, J and Best, SM and Barber, ZH and Bonfield, W (2007) Surface wettability enhances osteoblast adhesion on silicon-substituted hydroxyapatite thin films. Bioceramics, Vol 19, Pts 1 and 2 , 330-332 877 - 880.

Torii, R and Oshima, M and Kobayashi, T and Takagi, K and Tezduyar, TE (2007) Influence of wall elasticity in patient-specific hemodynamic simulations. Computers and Fluids , 36 (1) 160 - 168.

Torii, R and Oshima, M and Kobayashi, T and Takagi, K and Tezduyar, TE (2007) Numerical investigation of the effect of hypertensive blood pressure on cerebral aneurysm - Dependence of the effect on the aneurysm shape. International Journal for Numerical Methods in Fluids , 54 (6-8) 995 - 1009.

Torii, R and Wood, NB and Hadjiloizou, N and Wright, A and Hughes, AD and Thom, SAM and Xu, XY (2007) Does the difference in realistic waveform before and after stenting affect hemodynamics in stenosed coronary artery? Proceedings of the ASME Summer Bioengineering Conference 2007, SBC 2007 467 - 468.

Torii, R and Wood, NB and Hughes, AD and Thom, SA and Aguado-Sierra, J and Davies, JE and Francis, DP and Parker, KH and Xu, XY (2007) A computational study on the influence of catheter-delivered intravascular probes on blood flow in a coronary artery model. J Biomech , 40 (11) 2501 - 2509. 10.1016/j.jbiomech.2006.11.004.

V

van Romunde, Z and Aleiferis, PG and Cracknell, RF and Walmsley, HL (2007) Effect of Fuel Properties on Spray Development from a Multi-Hole DISI Engine Injector. SAE Transactions, Journal of Engines , 116 (3) , Article 2007-01-4032. 10.4271/2007-01-4032.

W

Wang, CZ and Wu, GX (2007) Time domain analysis of second-order wave diffraction by an array of vertical cylinders. JOURNAL OF FLUIDS AND STRUCTURES , 23 (4) 605 - 631. 10.1016/j.jfluidstructs.2006.10.008.

Wang, CZ and Wu, GX and Drake, KR (2007) Interactions between nonlinear water waves and non-wall-sided 3D structures. OCEAN ENG , 34 (8-9) 1182 - 1196. 10.1016/j.oceaneng.2006.07.005.

Wang, DZ and Edirisinghe, MJ and Jayasinghe, SN (2007) A novel 3D patterning technique for forming advanced ceramics. High-Performance Ceramics IV, Pts 1-3 , 336-338 977 - 979.

Wang, DZ and Jayasinghe, SN and Edirisinghe, MJ and Luklinska, ZB (2007) Coaxial electrohydrodynamic direct writing of nano-suspensions. J NANOPART RES , 9 (5) 825 - 831. 10.1007/s11051-006-9130-5.

Weightman, APH and Culmer, PR and Levesley, MC and Hanson, B (2007) An application of remotley controlled experiments to perform feedforward and feedback damping control of an electro mechanical servomechanism. In: Webist 2007 - 3rd International Conference on Web Information Systems and Technologies, Proceedings. (pp. 419 - 426).

Wu, GX (2007) Fluid impact on a solid boundary. JOURNAL OF FLUIDS AND STRUCTURES , 23 (5) 755 - 765. 10.1016/j.jfluidstructs.2006.11.002.

Wu, GX (2007) Second order resonance of sloshing in a tank. Ocean Engineering 34 - 2345-2349.

Wu, GX (2007) Second-order resonance of sloshing in a tank. OCEAN ENGINEERING , 34 (17-18) 2345 - 2349. 10.1016/j.oceaneng.2007.05.004.

Wu, GX (2007) Two dimensional liquid column and liquid droplet impact on a solid wedge. Quarterly Journal of Mechanics and Applied Mathematics , 60 496 - 511.

Wu, GX (2007) Two-dimensional liquid column and liquid droplet impact on a solid wedge. QUARTERLY JOURNAL OF MECHANICS AND APPLIED MATHEMATICS , 60 497 - 511. 10.1093/qjmam/hbm020.

Z

Zangeneh, M (2007) Advanced design software for pumps. World Pumps (489) 28 - 31.

Zhang, HB and Edirisinghe, MJ and Huang, J (2007) Electrohydrodynamic processing routes for bioceramics. BIOCERAMICS, VOL 19, PTS 1 AND 2 , 330-332 139 - 142.

Zhang, YB and Godfrey, A and Miodownik, MA and Liu, W and Liu, Q (2007) Generation of initial microstructures for Monte Carlo Potts model Simulations of quasi-binary grain growth. Recrystallization and Grain Growth III, Pts 1 and 2 , 558-559 821 - 824.

Zhang, YB and Godfrey, A and Miodownik, MA and Liu, W and Liu, Q (2007) Modeling of cube-texture evolution during grain growth in Ni thick-films based on experimental observations. Recrystallization and Grain Growth III, Pts 1 and 2 , 558-559 1043 - 1050.

Zheng, X and Duan, WY and Wu, GX (2007) Numerical simulation of violent free surface through a higher order SPH method. In: (Proceedings) Int. Conf. of Violent Flow.

Zou, Z and Tan, PJ and Reid, SR and Li, S and Harrigan, JJ (2007) Dynamic crushing of a one-dimensional chain of type II structures. INT J IMPACT ENG , 34 (2) 303 - 328. 10.1016/j.ijimpeng.2005.08.002.

This list was generated on Tue May 21 10:37:18 2013 BST.